1200字范文 > 网络远程唤醒 WOL Magic Packet

网络远程唤醒 WOL Magic Packet

时间：2022-06-30 17:55:37

Magic Packet

Magic Packet白皮书介绍:

The basic technical details of Magic Packet Technologyare simple and easy to understand. There is also a sec-ond set of details, which will be implementation spe-ciﬁc. In other words, silicon- or gate-levelimplementations of Magic Packet Technology may dif-fer from AMD's approach and be completely interoper-able, as long as the basic feature set is maintained.

/view/d5a3282e453610661ed9f487.html

AMD公司出的网络唤醒协议,即发送远程唤醒数据包,Magic Packet虽然只是AMD公司所开发的一项技术，但是受到了几乎所有网卡制造商的支持，因此，大多数流行网卡都能与之很好地兼容。(后生产的主板)

WOL原理

WOL(Wake on Lan)，即局域网唤醒，从根本上来说是硬件设备提供的一项管理功能,该功能可以当电脑处于关机或休眠状态时,通过给网卡发送特定的数据包从而命令网卡向主板发送开机指令,进而实现上电开机.可见，网络唤醒需要硬件（主要是主板和网卡）的支持.

硬件设置

进入BIOS，将“Power Management Setup”中的“Wake Up On LAN”或“Resume by LAN”项设置为“Enable”或“On”,类似于这样,因为主板不一样,BIOS设置位置有可能有差异

比如我的主板设置是在:Setting-Advanced-Wake up event setup-Resume By PCI-E Device设置为Enable.

有的人说还要设置boot的第一启动项为network,我试过不需要滴!

软件设置

BIOS设置好了,硬件已经满足条件了,然后需要OS级别的软件设置

Windows设置:

设备管理器-网卡设备-属性-高级, 在列表里能找到“Wakeup Capabilities(唤醒功能)”设置值为“MagicPacket”或”Both”.

Linux设置:

先通过ifconfig查看要wol的网卡.

这里需要说下,好多网友说没有eth0, 对! 我也没有这个网卡的信息,因为你用的肯定是Ubuntu的衍生版,在Ubuntu 16.04之后以太网卡名称由eth0，变成了enp3s0,还有systemd替换掉了initd来引导系统,参考: Linux网卡命名enp3s0说明

用ethtool命令打印网卡信息

sudo ethtool enp3s0

打印结果:

....

Supports Wake-on: pumbgWake-on: gCurrent message level: 0x00000033 (51)drv probe ifdown ifup

Wake-on 参数:

d 表示禁用disable

g表示启用great

如果wake-on参数为d就要启用wol, 启用命令:

sudo ethtool -s enp3s0 wol g

必须要用sudo 管理员权限否则会提示:Cannot get current wake-on-lan settings: Operation not permitted

-s参数是修改以太网设备设置

supports wake-on 中的参数

获取MAC地址

Windows 直接在网络设备-属性里面, linux使用ifconfig 命令查看

例如linux:

enp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500inet 192.168.1.213 netmask 255.255.255.0 broadcast 192.168.1.255inet6 fe80::a680:65a4:a006:5bbc prefixlen 64 scopeid 0x20<link>ether d8:cb:8a:3f:32:d2 txqueuelen 1000 (以太网)RX packets 890331 bytes 1003253740 (1.0 GB)RX errors 0 dropped 0 overruns 0 frame 0TX packets 555010 bytes 73345907 (73.3 MB)TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

网络唤醒

到这;已经有了BIOS的支持,有了OS wake-on的支持,又知道了MAC地址,说明被控制(唤醒)机已经Ready了.

局域网唤醒

现在我们需要局域网的电脑或者设备去访问,访问不是随随便便访问的,因为Magic Packet是一种协议规则,必须要用规则发送,关于规则可看下一个段落解析Magic Packet包

我们用GUI工具去访问,常用的WOL工具有

WakeOnLanGui

下载地址:/wake-on-lan/wake-on-lan-gui

WakeMeOnLan

下载地址:

参数IP地址,MAC地址,任意一个端口号,IP地址也可以直接填写255.255.255.255

Linux下我没有找到GUI工具,只有wakeonlan命令了

sudo apt install wakeonlan

唤醒目标主机:

wakeonlan d8:cb:8a:3f:32:d2

输出:

Sending magic packet to 255.255.255.255:9 with d8:cb:8a:3f:32:d2

局域网手机唤醒

在同一个局域网下,手机也可以唤醒目标主机

Android APP:

Wake On Lan

下载地址:/files/3869.html

iphone APP:

RemoteBoot

下载地址:appstore自己搜.....

准备放大招了!!!!!

互联网远程唤醒

虽然 WOL (Wake on Lan)网络唤醒原本的设计就是 LAN局域网环境下使用的，但其实我们也是可以想办法让其在 WAN 广域网 (即互联网) 下使用——Wake On Wan。这样，在公司唤醒家里的电脑(在家唤醒公司电脑...........)

第一步:设置端口映射（虚拟服务器）

因为广域网不知道我们局域网内对应的主机是哪一个,所以只访问外网的IP不会把Magic Packet包发到局域网指定的电脑上.我们需要路由器端口映射的支持

登陆路由器找到传输控制-NAT设置-虚拟服务器

路由器必须为顶级路由而非二级即二级以下

如果路由器LAN设置的是DHCP动态分配IP,有可能这次分配的局域网IP与重启之后局域网IP不统一(如果设备少于DHCP分配区间,IP会一直续租), 所以最好做一个静态地址分配或者IP与MAC绑定.

对于外网,如果IP是运营商固定IP可以直接使用公网IP,如果非固定IP(自动获取IP与PPPoE拨号)可以通过花生壳进行DDNS动态域名解析.使用动态域名替代公网IP.

第二步:查看公网IP

通过站长工具/查看对应公网IP

第三步:网络访问目标

OK! 此时,可以通过手机APP进行互联网的唤醒了,关闭WiFi,打开4G.好吧,不关WiFi也行.

当我们按BOOT时,就会通过公网IP端口映射到指定的主机,发送Magic Packet包唤醒电脑.

depicus提供了在线远程唤醒 (现在貌似唤不起来了！！！)

/wake-on-lan/woli

网站这样解释:

Wake on Lan Magic Packets can be sent over the Internet - why not try waking up one of your machines with our free Wake On Wan Service. Want a quick way to use this page ?

Bookmark/wake-on-lan/woli?m=001143BDA600&i=82.110.108.30&s=255.255.255.255&p=4321will get you straight there without the need to press those pesky send buttons.

换句话说,我们可以不用下载APP,只要保存一个书签,当需要的时候访问书签即可.

/wake-on-lan/woli?m=d8cb8a3f32d2&i=58.37.39.82&s=255.255.255.255&p=4321

TeamViewer 自带Lan网络唤醒

在TeamViewer-其他-常规-网络设置中就有自带的Lan网络唤醒

填写公共地址IP或端口映射对应的NAT网址，手机端TeamViewer登陆对应的账户，当主机关机时我们就可以通过手机端TeamViewer唤醒电脑

解析Magic Packet包

我们已经知道,Magic Packet是一种协议规则,必须遵从规则发送,Magic Packet的包格式很简单,首先是六个FF,然后是重复十六次待唤醒电脑的MAC

FF FF FF FF FF FF d8 cb 8a 3f 32 d2 d8 cb 8a 3f 32 d2 .......

理论上可以在任意网络封包中打包Magic Packet,不过一般选择UDP或IPX

Python代码:

#!/usr/bin/env python# -*- encoding: utf-8 -*-"""Small module for use with the wake on lan protocol."""from __future__ import absolute_importfrom __future__ import unicode_literalsimport argparseimport socketimport structimport reBROADCAST_IP = '255.255.255.255'DEFAULT_PORT = 9def create_magic_packet(macaddress):"""Create a magic packet.A magic packet is a packet that can be used with the for wake on lanprotocol to wake up a computer. The packet is constructed from themac address given as a parameter.Args:macaddress (str): the mac address that should be parsed into amagic packet."""if len(macaddress) == 12:passelif len(macaddress) == 17:sep = macaddress[2]macaddress = macaddress.replace(sep, '')else:raise ValueError('Incorrect MAC address format')# Pad the synchronization streamdata = b'FFFFFFFFFFFF' + (macaddress * 16).encode()send_data = b''# Split up the hex values in packfor i in range(0, len(data), 2):send_data += struct.pack(b'B', int(data[i: i + 2], 16))return send_datadef send_magic_packet(*macs, **kwargs):"""Wake up computers having any of the given mac addresses.Wake on lan must be enabled on the host device.Args:macs (str): One or more macaddresses of machines to wake.Keyword Args:ip_address (str): the ip address of the host to send the magic packetto (default "255.255.255.255")port (int): the port of the host to send the magic packet to(default 9)"""packets = []ip = kwargs.pop('ip_address', BROADCAST_IP)port = kwargs.pop('port', DEFAULT_PORT)for k in kwargs:raise TypeError('send_magic_packet() got an unexpected keyword ''argument {!r}'.format(k))for mac in macs:packet = create_magic_packet(mac)packets.append(packet)sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)sock.setsockopt(socket.SOL_SOCKET, socket.SO_BROADCAST, 1)# 如果输入的是域名，将域名转换为IPipv4_regex = pile(r'(?:25[0-5]|2[0-4]\d|[0-1]?\d?\d)(?:\.(?:25[0-5]|2[0-4]\d|[0-1]?\d?\d)){3}',re.IGNORECASE)if not ipv4_regex.match(ip):ip=socket.gethostbyname(ip)sock.connect((ip, port))for packet in packets:sock.send(packet)sock.close()print('sent to '+ip)def main(argv=None):"""Run wake on lan as a CLI application."""parser = argparse.ArgumentParser(description='Wake one or more computers using the wake on lan'' protocol.')parser.add_argument('macs',metavar='mac address',nargs='+',help='The mac addresses or of the computers you are trying to wake.')parser.add_argument('-i',metavar='ip',default=BROADCAST_IP,help='The ip address of the host to send the magic packet to.'' (default {})'.format(BROADCAST_IP))parser.add_argument('-p',metavar='port',type=int,default=DEFAULT_PORT,help='The port of the host to send the magic packet to (default 9)')args = parser.parse_args(argv)send_magic_packet(*args.macs, ip_address=args.i, port=args.p)if __name__ == '__main__': # pragma: nocovermain()

terminal执行：

python3 WakeOnWan.py -i -p 9 d8:cb:8a:3f:32:d2

python3 WakeOnWan.py -i 192.168.1.105 -p 9 d8:cb:8a:3f:32:d2

C++ 代码:

#include <stdio.h>#include <string.h>#include <stdlib.h>#include <unistd.h>#include <sys/types.h>#include <sys/stat.h>#include <sys/socket.h>#include <netinet/in.h>#include <arpa/inet.h>#include <netdb.h>void fill_magic_buf(void *magic_buf, void *mac){int i;char *ptr;ptr = magic_buf;memset(ptr, 0xFF, 6);ptr += 6;for(i = 0; i < 16; ++i) {memcpy(ptr, mac, 6);ptr += 6;}}void usage(void){printf("usage...\n");}int main(int argc, char **argv){int s;int packet_num = 10;char c;unsigned char mac[6] = {0x00, 0x1A, 0x92, 0xE5, 0x1B, 0xA7};char dstip[256] = "192.168.9.180";int port = 9;struct sockaddr_in address;char magic_buf[6 + 6 * 16] = {0};daemon(0,0); /* run in background */while((c = getopt(argc, argv, "d:m:p:")) != -1) {switch(c) {case 'd':strcpy(dstip, optarg);break;case 'm':sscanf(optarg, "%x:%x:%x:%x:%x:%x",(unsigned int*)&mac[0], (unsigned int*)&mac[1],(unsigned int*)&mac[2], (unsigned int*)&mac[3],(unsigned int*)&mac[4], (unsigned int*)&mac[5]);break;case 'p':port = atoi(optarg);break;default:usage();return -1;}}s = socket(AF_INET, SOCK_DGRAM, 0);if (s == -1) {perror("Opening socket");exit(EXIT_FAILURE);}memset(&address, 0, sizeof(struct sockaddr_in));address.sin_family = AF_INET;address.sin_addr.s_addr = inet_addr(dstip);address.sin_port = htons(port);fill_magic_buf(magic_buf, mac);/* ten packets. TODO: use ping to check whether the destination is on or else. */while (packet_num-- > 0) {if (sendto(s, magic_buf, sizeof(magic_buf), 0,(struct sockaddr *)&address, sizeof(address)) < 0) {printf("sendto\n");exit(EXIT_FAILURE);}sleep(1);}exit(EXIT_SUCCESS);}