1200字范文 > linux expect 扩容磁盘 openstack VM 磁盘扩容修复 GPT 分区更新分区表后拉伸文件系统...

linux expect 扩容磁盘 openstack VM 磁盘扩容修复 GPT 分区更新分区表后拉伸文件系统...

时间：2022-05-20 02:44:23

openstack VM 磁盘扩容，修复 GPT 分区，更新分区表后，拉伸文件系统

-06-23 分类：Hardware 标签：Openwrt Route

起因

之前，厂里 openstack 虚拟机，「云主机类型」不同模板定义的磁盘大小。是在原镜像的「根磁盘」上附加 (attach) 相应大小的「临时磁盘」来实现的。在虚拟机里面看到的是 2 块独立的磁盘设备。将虚拟机「临时磁盘」扩容到逻辑卷组，以此做的快照启动，找不到之前附加的「临时磁盘」，杯具发生了：起不来 -_-!

现在，不同模板直接指定不同大小的「根磁盘」，不再使用「临时磁盘」。生成的虚拟机，就只看到一个扩容后 (resize) 的磁盘。但由于母盘镜像大小和模板定义的磁盘大小不一样，parted 分区操作时，需要先修复分区，系统才能识别到相对母盘扩容的磁盘空间，然后分区，扩容逻辑卷组，拉伸文件系统，这样做的快照才可以正常使用。

经过

修复 GPT 分区

# parted /dev/vda

Using /dev/vda

Welcome to GNU Parted! Type 'help' to view a list of commands.

(parted) p

Error: The backup GPT table is not at the end of the disk, as it should be.

This might mean that another operating system believes the disk is smaller.

Fix, by moving the backup to the end (and removing the old backup)?

Fix/Ignore/Cancel? f

Warning: Not all of the space available to /dev/vda appears to be used,

you can fix the GPT to use all of the space (an extra 125829120 blocks) or continue

with the current setting?

Fix/Ignore? f

parted 没有可以自动 Fix 分区表的命令行参数，只好用 expect 交互式修复 GPT 分区，并扩增分区

expect -c 'spawn parted /dev/vda; \

expect "(parted)"; send -- "p\r"; \

expect "Fix/Ignore/Cancel?"; send -- "f\r"; \

expect "Fix/Ignore?"; send -- "f\r"; \

expect "(parted)"; send -- "mkpart primary 42.9GB 100%\r"; \

expect "(parted)"; send -- "p\r"; \

expect "(parted)"; send -- "q\r"; \

exit'

更新分区表

上面修复完 GPT 分区后，会出现下面的提示，要重启才能重新识别新分区：

WARNING: the kernel failed to re-read the partition table on /dev/vda (Device or resource busy).

As a result, it may not reflect all of your changes until after reboot.

parted 虽然可以看到新分区，但系统里找不到新分区对应的 block 设备

# parted /dev/vda print

Model: Virtio Block Device (virtblk)

Disk /dev/vda: 129GB

Sector size (logical/physical): 512B/512B

Partition Table: gpt

Number Start End Size File system Name Flags

1 1049kB 211MB 210MB ext4 boot

2 211MB 42.9GB 42.7GB lvm

3 42.9GB 129GB 85.9GB primary

# ls /dev/vda

vda vda1 vda2

# cat /proc/partitions

major minor #blocks name

252 0 125829120 vda

252 1 204800 vda1

252 2 41736192 vda2

尝试使用 partprobe 刷新分区表，结果无效。依然会提示 reboot 才能更新分区表When you update the partition table, you need to tell the kernel it has been updated. Normally you can use partprobe. However, on RHEL6 , this no longer works for disks that have partitions already mounted (e.g. your system disk on sda) This is considered too dangerous, so the developers stopped this in RHEL6 . You can work around this (although not advisable) by using partx to forcibly add new partitions to /proc/partitions

上面帖子说 RHEL6 中 partprobe 不支持更新已挂载的磁盘设备，要用 partx 命令强制更新分区表：

$ man partx

-a, --add

Add the specified partitions, or read the disk and add all partitions.

# partx -av /dev/vda

device /dev/vda: start 0 size 2097152000

gpt: 3 slices

# 1: 2048- 411647 ( 409600 sectors, 209 MB)

# 2: 411648- 83884031 ( 83472384 sectors, 42737 MB)

# 3: 83884032-251656191 (167772160 sectors, 85899 MB)

BLKPG: Device or resource busy

error adding partition 1