1 tar
1.2 tar介绍
tar命令是linux系统中对文件和目录解压缩命令。tar命令可以用于对后缀名为.tar,tar.gz等常用文件。
1.3 tar参数
系统中通过tar --help查看：
Main operation mode:-A, --catenate, --concatenate append tar files to an archive-c, --createcreate a new archive-d, --diff, --comparefind differences between archive and file system--deletedelete from the archive (not on mag tapes!)-r, --appendappend files to the end of an archive-t, --list list the contents of an archive--test-label test the archive volume label and exit-u, --updateonly append files newer than copy in archive-x, --extract, --get extract files from an archiveOperation modifiers:--check-device check device numbers when creating incrementalarchives (default)-g, --listed-incremental=FILE handle new GNU-format incremental backup-G, --incrementalhandle old GNU-format incremental backup--ignore-failed-read do not exit with nonzero on unreadable files--level=NUMBER dump level for created listed-incremental archive-n, --seek archive is seekable--no-check-devicedo not check device numbers when creatingincremental archives--no-seek archive is not seekable--occurrence[=NUMBER] process only the NUMBERth occurrence of each filein the archive; this option is valid only inconjunction with one of the subcommands --delete,--diff, --extract or --list and when a list offiles is given either on the command line or viathe -T option; NUMBER defaults to 1--sparse-version=MAJOR[.MINOR]set version of the sparse format to use (implies--sparse)-S, --sparsehandle sparse files efficientlyOverwrite control:-k, --keep-old-files don't replace existing files when extracting,treat them as errors--keep-newer-filesdon't replace existing files that are newer thantheir archive copies--no-overwrite-dirpreserve metadata of existing directories--overwrite overwrite existing files when extracting--overwrite-dir overwrite metadata of existing directories whenextracting (default)--recursive-unlinkempty hierarchies prior to extracting directory--remove-files remove files after adding them to the archive--skip-old-files don't replace existing files when extracting,silently skip over them-U, --unlink-first remove each file prior to extracting over it-W, --verifyattempt to verify the archive after writing itSelect output stream:--ignore-command-error ignore exit codes of children--no-ignore-command-error treat non-zero exit codes of children aserror-O, --to-stdout extract files to standard output--to-command=COMMAND pipe extracted files to another programHandling of file attributes:--atime-preserve[=METHOD] preserve access times on dumped files, eitherby restoring the times after reading(METHOD='replace'; default) or by not setting thetimes in the first place (METHOD='system')--delay-directory-restore delay setting modification times andpermissions of extracted directories until the endof extraction--group=NAME force NAME as group for added files--mode=CHANGES force (symbolic) mode CHANGES for added files--mtime=DATE-OR-FILE set mtime for added files from DATE-OR-FILE-m, --touchdon't extract file modified time--no-delay-directory-restorecancel the effect of --delay-directory-restoreoption--no-same-owner extract files as yourself (default for ordinaryusers)--no-same-permissions apply the user's umask when extracting permissionsfrom the archive (default for ordinary users)--numeric-owner always use numbers for user/group names--owner=NAME force NAME as owner for added files-p, --preserve-permissions, --same-permissionsextract information about file permissions(default for superuser)--preserve same as both -p and -s--same-owner try extracting files with the same ownership asexists in the archive (default for superuser)-s, --preserve-order, --same-ordersort names to extract to match archiveHandling of extended file attributes:--acls Enable the POSIX ACLs support--no-acls Disable the POSIX ACLs support--no-selinux Disable the SELinux context support--no-xattrs Disable extended attributes support--selinux Enable the SELinux context support--xattrsEnable extended attributes support--xattrs-exclude=MASK specify the exclude pattern for xattr keys--xattrs-include=MASK specify the include pattern for xattr keysDevice selection and switching:-f, --file=ARCHIVE use archive file or device ARCHIVE--force-localarchive file is local even if it has a colon-F, --info-script=NAME, --new-volume-script=NAMErun script at end of each tape (implies -M)-L, --tape-length=NUMBER change tape after writing NUMBER x 1024 bytes-M, --multi-volume create/list/extract multi-volume archive--rmt-command=COMMAND use given rmt COMMAND instead of rmt--rsh-command=COMMAND use remote COMMAND instead of rsh--volno-file=FILEuse/update the volume number in FILEDevice blocking:-b, --blocking-factor=BLOCKS BLOCKS x 512 bytes per record-B, --read-full-records reblock as we read (for 4.2BSD pipes)-i, --ignore-zeros ignore zeroed blocks in archive (means EOF)--record-size=NUMBER NUMBER of bytes per record, multiple of 512Archive format selection:-H, --format=FORMAT create archive of the given formatFORMAT is one of the following:gnu GNU tar 1.13.x formatoldgnu GNU format as per tar <= 1.12pax POSIX 1003.1-2001 (pax) formatposixsame as paxustarPOSIX 1003.1-1988 (ustar) formatv7 old V7 tar format--old-archive, --portabilitysame as --format=v7--pax-option=keyword[[:]=value][,keyword[[:]=value]]...control pax keywords--posixsame as --format=posix-V, --label=TEXT create archive with volume name TEXT; atlist/extract time, use TEXT as a globbing patternfor volume nameCompression options:-a, --auto-compress use archive suffix to determine the compressionprogram-I, --use-compress-program=PROGfilter through PROG (must accept -d)-j, --bzip2filter the archive through bzip2-J, --xz filter the archive through xz--lzip filter the archive through lzip--lzma filter the archive through lzma--lzop--no-auto-compressdo not use archive suffix to determine thecompression program-z, --gzip, --gunzip, --ungzip filter the archive through gzip-Z, --compress, --uncompress filter the archive through compressLocal file selection:--add-file=FILE add given FILE to the archive (useful if its namestarts with a dash)--backup[=CONTROL]backup before removal, choose version CONTROL-C, --directory=DIR change to directory DIR--exclude=PATTERNexclude files, given as a PATTERN--exclude-backupsexclude backup and lock files--exclude-caches exclude contents of directories containingCACHEDIR.TAG, except for the tag file itself--exclude-caches-all exclude directories containing CACHEDIR.TAG--exclude-caches-under exclude everything under directories containingCACHEDIR.TAG--exclude-tag=FILEexclude contents of directories containing FILE,except for FILE itself--exclude-tag-all=FILE exclude directories containing FILE--exclude-tag-under=FILE exclude everything under directoriescontaining FILE--exclude-vcsexclude version control system directories-h, --dereferencefollow symlinks; archive and dump the files theypoint to--hard-dereferencefollow hard links; archive and dump the files theyrefer to-K, --starting-file=MEMBER-NAMEbegin at member MEMBER-NAME in the archive--newer-mtime=DATEcompare date and time when data changed only--no-null disable the effect of the previous --null option--no-recursion avoid descending automatically in directories--no-unquote do not unquote filenames read with -T--null -T reads null-terminated names, disable -C-N, --newer=DATE-OR-FILE, --after-date=DATE-OR-FILEonly store files newer than DATE-OR-FILE--one-file-systemstay in local file system when creating archive-P, --absolute-names don't strip leading `/'s from file names--recursion recurse into directories (default)--suffix=STRING backup before removal, override usual suffix ('~'unless overridden by environment variableSIMPLE_BACKUP_SUFFIX)-T, --files-from=FILEget names to extract or create from FILE--unquote unquote filenames read with -T (default)-X, --exclude-from=FILE exclude patterns listed in FILEFile name transformations:--strip-components=NUMBER strip NUMBER leading components from filenames on extraction--transform=EXPRESSION, --xform=EXPRESSIONuse sed replace EXPRESSION to transform filenamesFile name matching options (affect both exclude and include patterns):--anchored patterns match file name start--ignore-caseignore case--no-anchoredpatterns match after any `/' (default forexclusion)--no-ignore-case case sensitive matching (default)--no-wildcards verbatim string matching--no-wildcards-match-slash wildcards do not match `/'--wildcards use wildcards (default)--wildcards-match-slash wildcards match `/' (default for exclusion)Informative output:--checkpoint[=NUMBER] display progress messages every NUMBERth record(default 10)--checkpoint-action=ACTION execute ACTION on each checkpoint--full-time print file time to its full resolution--index-file=FILEsend verbose output to FILE-l, --check-linksprint a message if not all links are dumped--no-quote-chars=STRING disable quoting for characters from STRING--quote-chars=STRING additionally quote characters from STRING--quoting-style=STYLE set name quoting style; see below for valid STYLEvalues-R, --block-number show block number within archive with each message--show-defaults show tar defaults--show-omitted-dirs when listing or extracting, list each directorythat does not match search criteria--show-transformed-names, --show-stored-namesshow file or archive names after transformation--totals[=SIGNAL]print total bytes after processing the archive;with an argument - print total bytes when thisSIGNAL is delivered; Allowed signals are: SIGHUP,SIGQUIT, SIGINT, SIGUSR1 and SIGUSR2; the nameswithout SIG prefix are also accepted--utc print file modification times in UTC-v, --verbose verbosely list files processed--warning=KEYWORDwarning control-w, --interactive, --confirmationask for confirmation for every actionCompatibility options:-owhen creating, same as --old-archive; whenextracting, same as --no-same-ownerOther options:-?, --help give this help list--restrict disable use of some potentially harmful options--usagegive a short usage message--version print program version
挑选常用的参数说明：
-c：创建新的压缩文件-x ：从压缩的文件中解压文件-v ：显示解压缩操作的过程-f ：指定压缩文件-z ：支持gzip解压文件-C ：切换到指定目录-r：添加文件至已压缩文件-u： 添加改变了和现有的文件到已经存在的压缩文件-t ：显示压缩文件的内容目录结构等-j ：支持bzip2解压文件-k ：解压时不覆盖当前目录下原有文件–delete：删除压缩包内的文件
1.4 tar压缩
1.4.1 压缩tar包
使用-c参数
多个文件压缩：
tar -cvf t.tar t1.txt t2.txt
目录压缩：
tar -cvf dir.tar dir1/
匹配压缩：
tar -cvf t.tar *.txt
1.4.2 压缩tar.gz包
使用-z参数
压缩为gizp
tar -zcvf t.tar.gz t1.txt t2.txt
1.4.3 压缩gar.bz2包
使用-j参数
压缩为bzip2
tar -jcvf t.tar.bz2 t1.txt t2.txt
1.4.4 查看压缩包内容
使用-t参数
tar -tvf t.tar
1.4.5 向压缩包添加/更新文件
使用-r参数
tar -rf t.tar newfile
1.4.6 删除压缩包内的文件
如t.tar内包含了t1.txt和其他文件，需删除t1.txt文件，使用--delete参数，需要注意删除文件的目录是全路径。
tar -f t.tar --delete /t/t1.txt
1.4.7 压缩时删除源文件
慎用，如果删除源文件较多时，可以使用这个命令。
tar -zcvf t.tar.gz t1.txt --remove-files
1.5 tar解压
1.5.1 直接解压到当前目录
使用-x参数
tar -xvf t.tar
1.5.2 解压到指定目录
使用-C参数
tar -xvf t.tar -C dir
1.5.3 解压包中的某些文件
tar -xvf t.tar t/t1.txt -C dir1
如上，将t.tar压缩包中的t1.txt解压至dir1目录。
1.5.4 解压不覆盖原有文件
使用-k参数
tar -xvkf t.tar
1.5.5 去除目录结构
使用--strip-components，如去掉一层目录
tar -xvf t.tar.gz --strip-components=1
2 zip/unzip
2.1 zip/unzip介绍
zip和unzip命令主要用于处理zip包，但是我们也可以用unzip去解压jar包。
2.2 zip/unzip参数
zip参数
zip [-options] [-b path] [-t mmddyyyy] [-n suffixes] [zipfile list] [-xi list]The default action is to add or replace zipfile entries from list, whichcan include the special name - to compress standard input.If zipfile and list are omitted, zip compresses stdin to stdout.-f freshen: only changed files -u update: only changed or new files-d delete entries in zipfile -m move into zipfile (delete OS files)-r recurse into directories-j junk (don't record) directory names-0 store only -l convert LF to CR LF (-ll CR LF to LF)-1 compress faster -9 compress better-q quiet operation -v verbose operation/print version info-c add one-line comments -z add zipfile comment-@ read names from stdin -o make zipfile as old as latest entry-x exclude the following names -i include only the following names-F fix zipfile (-FF try harder) -D do not add directory entries-A adjust self-extracting exe -J junk zipfile prefix (unzipsfx)-T test zipfile integrity -X eXclude eXtra file attributes-y store symbolic links as the link instead of the referenced file-e encrypt -n don't compress these suffixes-h2 show more help
常用：
-f 与"-u"参数类似，更新/创建文件；-d 删除压缩文件内指定的文件；-r 递归处理指定目录及子目录；-j 只压缩该目录下的所有文件，不带目录名。-u 更换较新的文件到压缩文件内。-v 显示指令执行过程或显示版本信息。-y 直接保存符号连接，而非该连接所指向的文件，本参数仅在UNIX之类的系统下有效。
unzip参数
Usage: unzip [-Z] [-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]Default action is to extract files in list, except those in xlist, to exdir;file[.zip] may be a wildcard. -Z => ZipInfo mode ("unzip -Z" for usage).-p extract files to pipe, no messages-l list files (short format)-f freshen existing files, create none -t test compressed archive data-u update files, create if necessary-z display archive comment only-v list verbosely/show version info -T timestamp archive to latest-x exclude files that follow (in xlist) -d extract files into exdirmodifiers:-n never overwrite existing files -q quiet mode (-qq => quieter)-o overwrite files WITHOUT prompting-a auto-convert any text files-j junk paths (do not make directories) -aa treat ALL files as text-U use escapes for all non-ASCII Unicode -UU ignore any Unicode fields-C match filenames case-insensitively-L make (some) names lowercase-X restore UID/GID info -V retain VMS version numbers-K keep setuid/setgid/tacky permissions -M pipe through "more" pager-O CHARSET specify a character encoding for DOS, Windows and OS/2 archives-I CHARSET specify a character encoding for UNIX and other archivesSee "unzip -hh" or unzip.txt for more help. Examples:unzip data1 -x joe => extract all files except joe from zipfile data1.zipunzip -p foo | more => send contents of foo.zip via pipe into program moreunzip -fo foo ReadMe => quietly replace existing ReadMe if archive file newer
常用参数说明：
-l 显示压缩包内文件-j 只保存文件名称及其内容，而不存放任何目录名称。-o 以压缩文件内拥有最新更改时间的文件为准，将压缩文件的更改时间设成和该-v 显示指令执行过程或显示版本信息。-d 指定解压目录，目录不存在会创建
2.1 压缩 zip
2.1.1 压缩目录
使用-r参数
zip -r t.zip dir/
2.1.2 压缩目录下的文件，不带目录名
使用-j参数
zip -rj t.zip dir/
2.1.3 删除压缩包内的指定文件
使用-d参数，如删除t.zip中的t1.txt文件：
zip -d t.zip t1.txt
2.2 解压 unzip
2.2.1 查看解压包的文件信息
使用-l参数
unzip -l t.zip
2.2.2 查看解压包内的文件详细信息
使用-v参数
unzip -v t.zip
2.2.3 解压压缩包到当前目录
使用-o参数
unzip -o t.zip
2.2.4 解压压缩包到指定目录
使用-d参数
unzip -o t.zip -d test/
2.2.5 解压压缩包内的指定文件
unzip -o t.zip "t2.txt" -d t2_dir
2.2.6 解压jar包
unzip -o service-1.jar -d service_dir
示例
[test@linux01 t1]$ touch t2.txt[test@linux01 t1]$ touch t3.txt[test@linux01 t1]$ zip -r t.zip *.txtadding: t2.txt (stored 0%)adding: t3.txt (stored 0%)[test@linux01 t1]$ lltotal 4-rw-rw-r-- 1 dsjtest dsjtest 0 Mar 19 12:15 t2.txt-rw-rw-r-- 1 dsjtest dsjtest 0 Mar 19 12:15 t3.txt-rw-rw-r-- 1 dsjtest dsjtest 302 Mar 19 12:15 t.zip[test@linux01 t1]$ [test@linux01 t1]$ [test@linux01 t1]$ unzip -l t.zip Archive: t.zipLengthDate Time Name--------- ---------- ----- ----0 03-19- 12:15 t2.txt0 03-19- 12:15 t3.txt--------- -------0 2 files[test@linux01 t1]$ [test@linux01 t1]$ [test@linux01 t1]$ unzip -v t.zip Archive: t.zipLength Method Size Cmpr Date Time CRC-32 Name-------- ------ ------- ---- ---------- ----- -------- ----0 Stored 0 0% 03-19- 12:15 00000000 t2.txt0 Stored 0 0% 03-19- 12:15 00000000 t3.txt--------------- --- -------00 0% 2 files[test@linux01 t1]$ [test@linux01 t1]$ [test@linux01 t1]$ unzip -o t.zip -d testArchive: t.zipextracting: test/t2.txt extracting: test/t3.txt [test@linux01 t1]$ lltotal 8-rw-rw-r-- 1 dsjtest dsjtest 0 Mar 19 12:15 t2.txt-rw-rw-r-- 1 dsjtest dsjtest 0 Mar 19 12:15 t3.txtdrwxrwxr-x 2 dsjtest dsjtest 4096 Mar 19 12:16 test-rw-rw-r-- 1 dsjtest dsjtest 302 Mar 19 12:15 t.zip[test@linux01 t1]$ [test@linux01 t1]$ [test@linux01 t1]$ unzip -o t.zip "t2.txt" -d t2_dirArchive: t.zipextracting: t2_dir/t2.txt [test@linux01 t1]$ lltotal 12drwxrwxr-x 2 dsjtest dsjtest 4096 Mar 19 12:19 t2_dir-rw-rw-r-- 1 dsjtest dsjtest 0 Mar 19 12:15 t2.txt-rw-rw-r-- 1 dsjtest dsjtest 0 Mar 19 12:15 t3.txtdrwxrwxr-x 2 dsjtest dsjtest 4096 Mar 19 12:16 test-rw-rw-r-- 1 dsjtest dsjtest 302 Mar 19 12:15 t.zip[test@linux01 t1]$
