支撑液膜,supported liquid membrane
1)supported liquid membrane支撑液膜
1.On linesupported liquid membrane enrichmentflow injection spectrophotometric determination of trace cadmium(Ⅱ) in water;支撑液膜在线萃取富集-流动注射分光光度法测定水中痕量镉(Ⅱ)
2.Research progress of stability ofsupported liquid membranes;支撑液膜稳定性研究进展
3.Extraction of the citric acid bysupported liquid membrane;支撑液膜法提取柠檬酸——膜配方的研究
英文短句/例句
1.Study on Transportation of Pt(Ⅳ) in Dispersion Supported Liquid Membrane System分散支撑液膜体系中Pt(Ⅳ)的传输研究
2.Study on transport of nickel(Ⅱ) by dispersion supportedliquid membrane system分散支撑液膜中金属镍(Ⅱ)的迁移研究
3.Transport of Copper(II) Ion in Supported Liquid MembraneCu~(2+)在支撑液膜中的传质过程
4.Mass Transport and Stability of Supported Liquid Membrane;支撑液膜分离过程传质与膜稳定性研究
5.Separation of Cs/Mo Using Ionic Liquids-Hollow Fiber Supported Liquid Membrane System离子液体-中空纤维支撑液膜技术分离Cs/Mo研究
6.Bench-scale Study of Textile Wastewater Treatment Using Supported Liquid Membrane Based on Vegetable Oil以植物油做膜液的支撑液膜法处理染料废水的研究
7.Experimental Study on Supported Liquid Membrane Treatment of Electroless Nickel Plating Wastewater;支撑液膜法处理化学镀镍废水的试验研究
8.Studies on Supported Liquid Membrane Separation of Heavy Metal Ions in Water Environment;水环境中重金属离子的支撑液膜分离研究
9.Effect of Extraction Conditions on Separation of Organic Acid by Supported Liquid Membranes萃取条件对支撑液膜法提取有机酸的影响
10.Study on the instability of supported liquid membrane by electrochemical impedance spectroscopy用电化学阻抗谱法研究支撑液膜的不稳定性
11.Study on the Supported Liquid Membrane Extraction and Membrane Integration Technology for Fumaric Acid;富马酸废水的支撑液膜萃取与膜集成技术的研究
12.Separation of Aromatic Hydrocarbon/Alkane Mixtures Using Supported Liquid Membrane with Ionic Liquids用于芳烃/烷烃体系蒸汽渗透分离的离子液体支撑液膜研究
13.Study on Transfer Behavior of Pt(Ⅳ) and Pd(Ⅱ) Through Supported Liquid Membrane;贵金属离子铂（Ⅳ）和钯（Ⅱ）的支撑液膜的迁移规律研究
14.Supported Liquid Membrane Extraction Technology and Its Application in Detection of Meat Security支撑液膜萃取技术及其在肉类安全检测中的应用
15.Transport of copper ion through supported liquid membrane in microporous polyvinylidene fluoride hollow fiber module多孔聚偏氟乙烯中空纤维支撑液膜中Cu(Ⅱ)的传输过程
16.Mass transfer and separation of phenol in tributyl phosphate/kerosene supported liquid membrane system磷酸三丁酯/煤油支撑液膜体系中苯酚的传质分离
17.RECOVERY OF CHROMIUMLON ION USING HYBRID LIQUID MEMBRANE TECHNOLOGY FROM PLATING WASTEWATER反萃预分散支撑液膜技术回收电镀废水中铬离子的研究
18.STUDY ON TRANSPORTATION AND SEPARATION OF Zn(Ⅱ)BY KEROSENE-PC-88A-HCl DISPERSION SUPPORTED LIQUID MEMBRANE SYSTEMPC-88A-煤油-HCl分散支撑液膜体系中Zn(Ⅱ)的传输与分离研究
相关短句/例句
supported liquid membranes支撑液膜
1.Application of ionic liquids insupported liquid membranes;离子液体在支撑液膜中的应用
2.Advances in separation mechanism , explanations for instability and methods for stability improvement insupported liquid membranes during the last thirty years were reviewed in this paper, and some researches on flue gas desulfurization(FGD) using this technology were also reported.支撑液膜技术作为一种高选择性和高渗透性的膜分离技术得到了越来越多的应用。
3.The losing behavior of liquid insupported liquid membranes(SLMs) was studied by electrochemical impedance spectroscopy(EIS) method in this paper.采用电化学阻抗法研究支撑液膜膜液的流失行为,并采用等效电路法分析得到的交流阻抗图谱。
3)supporting liquid membrane支撑液膜
1.The citric acid was extracted from citric acid solution by polypropylenesupporting liquid membrane, and its mass transfer conditions in the technological process were studied.用聚丙烯支撑液膜从柠檬酸溶液中提取柠檬酸,通过正交实验考察和分析料液相浓度、反萃取相浓度、搅拌速率、温度等因素的影响,得到最佳传质条件料液相浓度为0。
2.The transferring behaviour of Cd(Ⅱ)ion throughsupporting liquid membrane was studied with porous polyproplylene membrane as supporting body and PC-88A/CHCl3 as carries;the effect of carries concentration,pH value,temperature and beginning concentration in feed phase etc.本文以多孔聚丙烯膜为支撑体,PC-88A/CHCL3为膜载体,研究了重金属离子Cd(Ⅱ)的支撑液膜传输的行为。
4)supported liquid membrane支撑体液膜
5)composite supported liquid membrane复合支撑液膜
1.Fabrication and vapor permeation characterization of a LiCl solution basedcomposite supported liquid membrane;基于LiCl溶液的复合支撑液膜的制备及其透湿性测定
6)Supported liquid membrane extraction支撑液膜萃取
延伸阅读
支撑液膜分子式：CAS号：性质：指液膜溶液借助于支撑体的微孔的毛细管力含浸于支撑体内，料液中要回收的物质通过支撑体微孔中的液膜进行透过而被回收。液膜支撑体主要采用疏水性多孔膜，其性能与支撑体材料、膜的厚度及微孔大小有关，膜厚25～50μm，微孔的平均孔径为0.02～1μm，孔径越小，液膜越稳定，但孔径过小会导致孔隙率下降，从而降低透过速度。支撑体一般采用聚丙烯、聚乙烯、聚砜及聚四氟乙烯等疏水性多孔膜。其透过机理可用示意图表示。支撑液膜多用于处理水溶液。
