拉锥,tapering
1)tapering[英]["teip?ri?][美]["tep?r??]拉锥
1.The combiner is fabricated with the method of fusion andtapering.给出了一种光纤耦合器,它有16个输入端和一个输出端,由光纤熔融和拉锥的方法制造而成。
英文短句/例句
1.Imporvment on the Pulling Processs and the Polarization Dependent Loss of 1X2 Fiber FBT Couplers1X2单模融拉型光纤耦合器拉锥工艺与PDL的改进
2.Optical Fiber Sensor for Liquid Refractive Index Based on Fiber Optic Taper基于熔融拉锥光纤的液体折射率传感器
3.A Fiber Bragg Grating Demodulation System Based on over Coupled Fused-coupler基于熔融拉锥过耦合器的光纤光栅解调系统
4.Studies and Experiments of a Surface Plasmon Resonance-based Hydrogen Sensor Using a Tapered Fiber;拉锥光纤表面等离子共振氢敏传感器研究与实验
5.Study on Femto-Second Pulse Propagation and Supercontinuum Generation in Tapered Fibers;飞秒脉冲在拉锥光纤中传输特性与超连续谱产生的研究
6.Mount Muhavura, the first of the volcanoes, is a perfect cone.火山中的第一座穆哈务拉山呈完美的圆锥形。
7.Analysis of Upper Bound Solution in Conmcal Die for Extrusion/Drawing Processes锥形凹模内挤压/拉拔过程的上限解分析
8.Adjustment for the Main Drive Bevel Gear Taishan-25 and Taishan-50 Tractors泰山-25、50型拖拉机中央传动锥齿轮副调整研究
9.THE MINERALOGICAL CHARACTERISTICS OF HEXAGONAL PYRAMID BERYL FOR DACALASU GRANITE-PEGMATITE IN ALTAY,XINJIANG新疆大卡拉苏花岗伟晶岩锥状绿柱石矿物特征
10.Study on Forming Conditions for One-Operation Deep Drawing in Conical Part of Thin Wall;薄壁锥形件一次拉深成形极限条件研究
11.Research on Reasonable Blank-Holder Force and Deep-drawing Limit of a Conical Part;圆锥形零件极限拉深系数及合理压边力的研究
12.Research on the Cylindrical Cup by Hydrodynamic Deep Drawing Based on Numerical Simulation基于数值模拟的锥形件充液拉深工艺研究
13.Dieless Drawing Technique for Making Tapered Pipe With Square Cross Section一种新型的锥形方管无模拉伸成形工艺
14.Mathematical Model to Schedule Dieless Drawing Speed for Tapered Tubes确定锥形管无模拉伸速度制度的数学模型
15.Calculation of critical blank holder force for drawing cone part with semicircular drawbead半圆筋拉深锥形零件中临界压边力的计算
16.In this paper, we show the existence of the multiple positive solutions of a class of three-order Boundary Value Problems via the fixed point theorem on cone.利用锥拉伸与锥压缩不动点定理研究了一类三阶两点边值问题的无穷多个正解。
17.The drug suramin, which is used to kill invading trypanosomes, is accumulated in lysosomes.用杀死侵入的锥虫的药物苏拉明，在溶酶体中积累。
18.New upper bound model for extrusion/drawing processes through conical die适用于分析锥形凹模内挤压/拉拔过程的新的上限模型
相关短句/例句
taper drawing锥形拉伸
1.8″brake cylinder istaper drawing part,and is one of the most critical parts in brake system of freight wagons.8″制动缸盖是锥形拉伸件,是铁路货车制动的关键件。
3)Broaching tap拉削丝锥
4)fused biconical taper熔融拉锥
1.Viscoelastic modeling and analysis of optical fibre coupler in process offused biconical taper;光纤耦合器熔融拉锥粘弹性建模与分析
2.Through the discussion of the key processing parameters in thefused biconical taper process,firstly the paper pointed out that this process was highly nonlinear and multi variable coupled.分析了熔融拉锥过程的关键工艺参数,指出该过程是一个高度非线性、多变量耦合作用的复杂过程。
3.Through theoretical and experimental research, the viscoelastic mechanical model of optical fiber coupler in the process offused biconical taper was established, with which, the numerical analysis under non-uniform temperature field was realized.基于理论与实验研究,建立了光纤耦合器熔融拉锥过程的粘弹流变力学模型,并给出了光纤耦合器非均匀温度场条件下的流变过程数值分析,获得了拉锥速度、熔融温度等流变工艺参数对器件应力分布与器件性能的影响规律。
5)fused taper熔融拉锥
1.The demodulation instrument is based on passive proportion demodulation method,which uses afused taper component as the li.解调仪基于无源比例解调原理,以熔融拉锥器件作为线性滤波器,采用锁相放大技术提取微弱信号,并利用单片机控制光纤Bragg光栅波长信息的采集、显示以及存储。
2.Based on the improvedfused taper technique,under the condition of slow change and a.然后,在改进熔融拉锥技术的同时,保持慢变、绝热条件拉制出在80 mm长度范围内具有良好均匀性、半径为5μm的高质量微细光纤,在此基础上采用自缠绕法研制出半径仅为500μm,谐振效果明显加强的全光纤型微环谐振器,从而很好地解决了集成型微环谐振器较高的弯曲损耗和连接损耗问题。
3.A portable and low-cost solution for FBG wavelength demodulation is proposed in this paper, which is based on passive proportion demodulation method withfused taper component as linear filter.通过采用无源比例解调方法,以熔融拉锥器件作为线性滤波器,为光纤Bragg光栅的解调提供了一种便携式低成本解决方案。
6)tapered fiber拉锥光纤
1.Analysing the coupling-losses of the optical amplifier module with twotapered fibers;拉锥光纤耦合的光放大器组件光损耗分析
2.Characteristics of supercontinuum generation intapered fibers;拉锥光纤与超连续谱的产生
3.Application,construction and principle of a hydrogen sensor based on surface plasmon resonance usingtapered fiber are studied.研究了拉锥光纤表面等离子共振氢敏感机理、构建及应用。
延伸阅读
“布拉马普特拉”级护卫舰主尺寸：舰长126.4米、舰宽14.5米、吃水4.5米排水量：3600吨（标准） 3850吨（满载）动 力：2台bhopal燃气轮机 30000马力航 速：27节续航力：4500海里/12节舰 员：313名武器装备：4座4联 3m-24e（ss-n-25）反舰导弹发射装置（射程130千米）1座 oto 76毫米主炮4座ak-630加特林6管30毫米近防炮2座3联装 324毫米鱼雷发射管2架“海王”mk42b反潜直升机防空导弹，印度海军坚持装备国产“特城舒尔”对空导弹（射程9千米）电子设备：声纳：巴拉特中频搜索和攻击舰壳声纳，thales sintra拖曳基阵雷达：ralw-2 d波段对空搜索雷达（lw08天线），ralw-3 s波段对空/对海雷达（da08天线），bel rashmi（pin 524） i波段导航雷达（zw06天线）“布拉马普特拉”级（brahmaputra）护卫舰是“戈达瓦里”级护卫舰的改进型，其舰体、动力等均未改动。最为显著的变动是将“戈达瓦里”级舰舰艏的4座单联p-20m（ss-n-2）反舰导弹发射装置改成4座4联3m-24e（ss-n-25）反舰导弹发射装置。反舰能力大大提高。首舰1989年下水，由于种种原因一直拖至2000年4月才加入海军服役。舷号f31
