充型过程,filling process
1)filling process充型过程
1.Numerical simulation of inclusion movement in moldfilling process of metal melt;金属液充型过程中夹杂物运动的数值模拟
2.Study of the factors affectingfilling process of grindingball by vertical centrifugal casting;立式离心铸造磨球充型过程的影响因素研究
3.Numerical simulation and experimental verification of the initial temperature distribution of castings during moldfilling process;铸造充型过程初始温度场的数值模拟及实验研究
英文短句/例句
1.Gas Gap Pressure During Mold Filling Process in Expendable Pattern Casting消失模铸造充型过程气隙压力的研究
2.Mold Filling Process Research for Three-Dimensional Numerical Simulation of Casting;铸件充型过程三维数值模拟技术研究
3.Numerical Simulation of Mold Filling of Castings Based on the BFC System;基于BFC系统铸件充型过程数值模拟
4.Filling Process Simulation of Die-casting and Performance Study罩壳压铸件充型过程模拟及性能研究
5.Simulation of Mold Filling and Gas Entrapment of Die Castings压铸充型过程与气体卷入的数值模拟
6.A TWO-PHASE FLOW MODEL FOR SIMULATING AIR ENTRAPMENT DURING MOLD FILLING OF HIGH PRESSURE DIE CASTING PROCESS应用两相流模型模拟压铸充型过程的卷气现象
7.Survey of the Research on the Mold Filling of Expendable Pattern Casting Process消失模铸造充型过程的研究进展及展望
8.Calculation of Heat Balance during Mold Filling for Hollow Camshaft in EPC消失模铸造空心凸轮轴充型过程中热平衡计算
9.Analysis on Mold Filling of Hollow Camshaft in EPC气化模铸造空心凸轮轴的充型过程分析
10.Study on Mold Filling in Magnesium Alloy EPC Process with Vacuum镁合金负压消失模铸造充型过程的研究
11.Study on Numerical Simulation of Mold Filling of a Casting Based on ANSYS Sofrware;基于ANSYS的铸件充型过程的数值模拟研究
12.The Researcher and Implementation of Computer Simulation of the Gear Box Casting During Filling Process;板形铸铁件消失模铸造充型过程模拟分析
13.Study on Numerical Simulation of Gas-Liquid Two-Phase Flow during Mold Filling Process;铸造充型过程气液两相流动数值模拟的研究
14.X-ray Observation of Melt Pouring of Al Alloy in Lost Foam Casting Process铝合金消失模铸造充型过程X射线观察
15.Effect of initial structure characteristic on evolution of primary phase in mold filling初始组织特征对充型过程中初生相演变的影响
16.Numerical simulation of die-casting mold filling process based on fractional step method基于分数步长法的压铸充型过程数值模拟
17.Simulation on Semi-Solid Thixo-Filling of AlSi15Cu3MgFe Alloy Casting半固态AlSi15Cu3MgFe合金铸件触变充型过程的数值模拟
18.Numerical Simulation of Filling and Solidification Process for Casting by Low-Pressure Casting;低压铸造铸件充型凝固过程数值模拟
相关短句/例句
mold filling充型过程
1.Numerical simulation of oxide entrapment andmold filling process of Al casting;铝合金铸件充型过程及氧化膜卷入的数值模拟
2.Calculation of Heat Balance during Mold Filling for Hollow Camshaft in EPC;消失模铸造空心凸轮轴充型过程中热平衡计算
3.Gas Gap Pressure During Mold Filling Process in Expendable Pattern Casting;消失模铸造充型过程气隙压力的研究
3)mold filling process充型过程
1.Development and application of numerical simulation for themold filling process of casting;铸造充型过程数值模拟的研究进展及应用
2.Numerical Simulation of Mold Filling Process for Wax Pattern in Investment Casting;熔模精密铸造蜡模充型过程的数值模拟
3.Numerical simulation equations were established for themold filling process of liquid metal with turbulent or laminar flows and for the process of liquid metal being solidified and cooled into the casting.建立了铸件充型过程中金属液流体湍流和层流流动及凝固冷却时三维速度场和温度场数值模拟的计算方程 ;介绍了这些方程的数值求解 ,相关边界条件及凝固潜热处理方法 ;以此为基础 ,编制了三维计算、前处理、后处理程序及相关数据库 ,形成了SRIFCAST软件。
4)Filling[英]["f?l??][美]["f?l??]充型过程
1.Magnetic Field Distribution in the Traveling Magnetic Field Generator for Electromagnetic Casting and Its Influences on theFilling Process;金属熔体在行波磁场铸造充型过程中受到6个力的作用,这6个力共同作用的结果使熔体充型过程中速度的变化存在加速、匀速、减速的变化规律,解释了与此相对应的铸造缺陷如冷隔、浇不足等形成的原因,并提出了两种改变磁场分布的方法。
5)filling and solidification processess充型和凝固过程
6)Mold Filling Process of Casting铸造充型过程
延伸阅读
充炭黑充油丁苯橡胶分子式：分子量：CAS号：性质：同时含有炭黑和油的丁苯橡胶。性能和用途与充炭黑丁苯橡胶和充油丁苯橡胶相似。由冷聚丁苯胶乳与炭黑的水分散液和油乳液经混合、凝聚、洗涤、过滤、干燥等步骤制得。
