高应变率拉伸,high strain rate tensile
1)high strain rate tensile高应变率拉伸
1.s: Thehigh strain rate tensile tests of carbon filament yarn are carried out by using SHPB that from modified SHPB.利用反射式间接拉伸Hopkinson杆实验装置对碳纤维进行高应变率拉伸。
英文短句/例句
1.Necking and Fracture of Oxygen-Free high Conductive Copper Bars Subjected to high Strain Rate Tension高导无氧铜杆高应变率拉伸下的颈缩与断裂
2.An improved technique for dynamic tension of metal ring by explosive loading实现材料高应变率拉伸加载的爆炸膨胀环技术
3.Mechanical behavior of PMMA under different temperatures and strain rates不同温度和应变率下PMMA拉伸性能
4.Tensile Impact Behavior of Multi-axial Multi-layer Warp Knitted (MMWK) Fabric Reinforced Composites;经编多轴向针织复合材料高应变率下的拉伸性能研究
5.Slow Strain Rate Test Studies of Stress Corrosion Cracking of Pipeline Steels;管线钢应力腐蚀慢应变速率拉伸试验研究
6.Stress Corossion Cracking Behavior of 5083 Aluminum Alloy in SSRT5083铝合金慢应变速率拉伸下的应力腐蚀行为
7.Experiment of the Tensile Properties of Polycarbonate at Different Strain Rates聚碳酸酯拉伸力学性能的应变率相关性实验
8.Special Drawing Methods That Could Improved Drawing Deformation Degree能提高拉伸变形程度的特殊拉伸方法
9.Development of software of true stress-true strain computation and analysis for high-temperature tension高温拉伸真应力-真应变计算分析软件开发
10.EFFECT OF STRAIN RATE AND SIZE ON THE MECHANICAL PROPERTIES OF NANO-BI-CRYSTAL CU UNDER UNI-AXIAL TENSION纳米双晶铜单向拉伸弹性性能的应变率效应和尺寸效应
11.Effect of Strain Rate on the Tensile Properties of Mg-Zn-Nd Alloy;应变速率对挤压变形Mg-Zn-Nd合金拉伸性能的影响
12.Research of the Preparation and Properties of the UPR Resin with High Tensile Strength and High Elongation at Break高拉伸强度高断裂伸长率UPR制备与性能研究
13.Constitutive Description of Temperature and Strain Rate Dependent Tensile Behaviors of Solder;焊锡钎料温度与应变率相关拉伸性能的本构描述
14.Strain rate dependences of tensile failure process for single graphene sheet:A molecular dynamics study单层石墨烯薄膜拉伸破坏应变率相关性的分子动力学研究
15.Aging & Stretcher Strains时间效应(老化)及拉伸应变
16.determination of tension set at high temperatures for vulcanized or thermoplastic rubber硫化橡胶或热塑橡胶高温拉伸下拉伸久变形和蠕变的测定
17.Tensile Deformation Behavior of Fine-Grained TC4 Titanium Alloy at High Temperature;细晶TC4钛合金高温拉伸变形行为研究
18.Tensile Creep Behavior of a 3D-C/SiC Composite at Elevated Temperature;3D-C/SiC的高温拉伸蠕变性能
相关短句/例句
tensile strain rate拉伸应变率
1.Effect oftensile strain rate on spall fracture in 20 steel;拉伸应变率对20钢层裂特性的影响
2.According to the curve,the spall strength,the thickness of spall scab and thetensile strain rate under different condition were obtained.根据所得曲线波形计算出相应条件下的层裂强度、层裂片厚度以及各自的应变率,最后得到层裂强度随拉伸应变率变化的关系曲线。
3)SSRT慢应变速率拉伸
1.Stress Corrosion Cracking of polythionic acids(PSCC) of 304 SS were investigated bySSRT,SEM and metallographic analysis.采用慢应变速率拉伸试验(SSRT)、扫描电镜断口分析以及金相显微组织分析等方法对304不锈钢连多硫酸应力腐蚀开裂(PSCC)行为进行了研究。
2.The stress corrosion behavior of 304 stainless steel in the solution saturated by H2S and the standard solution of NACE was studied with electrochemical test and slow strain rate tension(SSRT) test.用电化学测试及慢应变速率拉伸试验(SSRT)方法对304不锈钢在饱和H2S溶液和NACE标准溶液中的应力腐蚀行为进行研究。
3.Stress Corrosion cracking of acids media(PSCC) of duplex stainles steel and ferritic stainless steel were investigated bySSRT,SEM and metallographic analysis and evaluate stress corrosion cracking sensitivity of ferritic stainless steel and duplex stainless steel in acids media.采用慢应变速率拉伸试验(SSRT)、扫描电镜(SEM)断口分析以及金相显微组织分析等方法对TP405铁素体不锈钢及2205双相不锈钢在酸性介质中应力腐蚀开裂(PSCC)行为进行了研究。
4)slow strain rate tension慢应变速率拉伸
1.The stress corrosion cracking (SCC) behaviors of X80 pipeline steel in near-neutral pH solutions were studied using electrochemical potentiodynamic scanning,slow strain rate tension(SSRT) and scanning electron microscopy.采用电化学动电位扫描技术、慢应变速率拉伸(SSRT)试验和扫描电镜观察研究了X80管线钢及焊接接头在NS4溶液中的应力腐蚀行为。
2.5% NaCl solution was investigated by usingslow strain rate tension,scanning electron microscope and transmission electron microscope.通过慢应变速率拉伸测试、扫描电镜及透射电镜分析等研究了2519铝合金在T6、T8热处理状态下,在空气和3。
3.The interaction between mechanics and electrochemistry during the stress corrosion cracking (SCC) of 7075 aluminum alloy was studied usingslow strain rate tension (SSRT) technique.用慢应变速率拉伸(SSRT)技术研究了7075铝合金在应力腐蚀过程中的力学与电化学交互作用。
5)slow strain rate test慢应变速率拉伸
1.The behavior of solid copper-induced embrittlement(SCIE) of TC11 titanium alloy was investigated usingslow strain rate tests(SSRT) and constant load tensile tests(DLTT) at different temperatures.分别采用慢应变速率拉伸、恒载荷拉伸加载方法研究了TC11钛合金在不同温度下的Cu脆行为,Cu与钛合金试样表面的接触分别采用离子束增强沉积和机械压合法实现。
2.The behaviors of stress corrosion cracking (SCC) of 7075 aluminum alloys with different heat treatments had been tested at various polarization potentials withslow strain rate test (SSRT) method.为了探讨极化对铝合金SCC敏感性的影响,采用慢应变速率拉伸技术研究了不同恒电位极化条件下7075T6、7075T7351、7075RRA铝合金的应力腐蚀行为。
6)slow strain rate tensile慢应变率拉伸
延伸阅读
拉伸应力-应变曲线分子式：CAS号：性质：在拉伸试验中，对试样所受的拉力与相应应变所作的坐标曲线图。它能形象地表示出应力与应变的对应关系。试验常在恒定的应变速率与伸长率下进行。
