低温气体雾化射流冷却,cryogenic pneumatic mist jet cooling
1)cryogenic pneumatic mist jet cooling低温气体雾化射流冷却
1.Analysis and experimental study of heat transfer incryogenic pneumatic mist jet cooling液滴低温气体雾化射流冷却换热理论分析与实验研究
英文短句/例句
1.Analysis and experimental study of heat transfer in cryogenic pneumatic mist jet cooling液滴低温气体雾化射流冷却换热理论分析与实验研究
2.The Cryogenic Mist Jet Cooling Technology in Turning Process of Titanium Alloy钛合金车削中的低温喷雾射流冷却技术
3.Cryogenic Mist Jet Impinging Cooling and Its Application in Machining of Titanium Alloy;低温喷雾射流冷却技术及其在钛合金机械加工中的应用
4.Thermal Analysis of Cryogenic Mist Jet Impinging Cooling and Its Application in Turnning of Titanium Alloy;低温喷雾射流冷却技术及其在钛合金车削加工中的应用
5.Fundamental Research on Cryogenic Pneumatic Mist Jet Impinging Cooling Based on Green Manufacturing;基于绿色制造的低温气动喷雾冷却的基础研究
6.Experimental Investigation of Non-boiling Spray Cooling with Low Surface Temperature and Big Water Flow Rate低温表面大流量无沸腾喷雾冷却试验研究
7.Cooling Characteristics and Heat Transaction Coefficients of Basic Oxygen Furnace during Spraying Cooling转炉汽雾冷却喷嘴限制射流强化换热特性
8.The Distributions and Variations of the Instant-temperature-field of BOF During Spraying Cooling汽雾冷却条件下转炉炉体瞬态温度场
9.THE APPLICATION OF OPPOSED WATER SPRAY COOLING IN AN HIGH-TEMPERATURE ENTRAINED-FLOW COAL GASIFIER对置喷水冷却在高温气流床气化炉中的应用
10.high temperature gas cooled reactor高温气体冷却式反应堆
11.Experimental Investigation on Atomization of Liquid Jet by Swirling Coaxial Gas同轴旋拧气流中液体射流雾化特性的实验研究
12.THE RESEARCH DEVELOPMENT OF LIQUID JET ATOMIZATION IN HIGH SPEED CROSSFLOW高速气流中横向液体射流雾化研究进展
13.Experimental Investigation on Atomization Characteristics of the Nozzle for Spray Cooling of Galvanized Strip Steel带钢镀后气雾冷却喷嘴雾化性能的试验研究
14.Review of spray cooling technique and prospect of spray cooling using nanofluids喷雾冷却技术综述及纳米流体喷雾应用前景
15.Mechanisms of the Atomization of a Viscous Liquid Jet in Compressible Gases可压缩气体中粘性液体射流雾化机理研究
16.Analysis on structural parameters of the atomizer with ring gas jet by holes环孔雾化器出口气体射流结构参数的研究
17.The air then passes through heat exchangers where it is cooled to cryogenic temperature.接着空气通过热交换器冷却到低温。
18.China Region Climate and Cold Storage of Grain Using Grain Refrigerator in Bin中国区域气候与谷物冷却机低温储粮
相关短句/例句
cryogenic pneumatic mist jet impinging低温气动喷雾射流冲击冷却
1.To solve the problems of workpiece-burn in grinding of titanium alloys,a new high(efficiency) cooling technology—cryogenic pneumatic mist jet impinging cooling technology(CPMJI) was offered.针对钛合金磨削加工中容易造成工件烧伤及加工质量不易保证的难题,提出了一种新的高效冷却技术———低温气动喷雾射流冲击冷却技术,并依据此思想开发出一套低温气动喷雾射流冲击冷却系统,将其应用于钛合金的磨削加工中。
3)atomizing jet cooling雾化射流冷却
1.Based on the experiments ofatomizing jet cooling the Ti alloy(Ti6Al4V) specimen with fixed pressure,wind and different quantities of water,this paper discussed the performance and regulation of heat-transfer when atomizing jet cools Ti alloy specimen with fixed pressure,wind and little water.文中以定压、定量风和不同含量水相组合时射流冷却被加热的钛合金(Ti6A l4V)试件的实验为基础,探讨了定压力、定量风和微量水相综合雾化射流冷却钛合金试件时的换热性能和规律。
4)Cryogenic pneumatic mist jet impinging cooling低温气动喷雾冷却
5)air-jet cooling气体射流冷却
6)spray cooling雾化喷射冷却
1.The mechanism of heat transfer inspray cooling is complicated, and most theories hitherto are immature.雾化喷射冷却的换热机理十分复杂,目前其研究还很不成熟。
2.The thickness and behavior of the liquid film on the surface of the wall is the most important to study heat transfer and it mechanism forspray cooling.冷却壁面上液膜的特性行为与厚度直接关系到雾化喷射冷却的深入研究。
延伸阅读
低温低温hypothermia低温状态下脑组织对缺氧的耐受性明显增加。体温低于37℃时，每减低1℃，脑组织代谢率减少6.7%，颅内压减低5.5%，在人工呼吸、心脏按压的同时或稍后应给予降温处理，可采用正规冬眠疗法使体温降至肛温35℃左右，目前尤为重视头部局部降温，戴冰帽，头温降至32℃左右，重症要降温3～5天。
