选区激光烧结,selective laser sintering
1)selective laser sintering选区激光烧结
1.Fabrication of particle reinforced copper matrix composites byselective laser sintering;颗粒增强铜基复合材料的选区激光烧结制备
2.Investigation on Formability of Sintering PP Part by Selective Laser Sintering;选区激光烧结PP试件成型性研究
3.Mechanism of P element inselective laser sintering of copper-based metal powder;磷元素对铜基金属粉末选区激光烧结作用机理
英文短句/例句
1.Development Status for Selective Laser Sintering of metal powder金属粉末选区激光烧结技术研究现状
2.Preparation of Controllable Structure Aluminum Foam based on Selective Laser Sintering基于选区激光烧结法制备可控结构泡沫铝
3.Numerical Simulation of Temperature Field in Selective Laser Sintering on PA6 Powders尼龙6选区激光烧结温度场的数值模拟
4.Simulation and Test of Transient Temperature of Selective Laser Sintering选区激光烧结瞬态温度场模拟与测试方法研究
5.Research on 316L stainless steel of porous structure fabricated by selective laser sintering316L不锈钢多孔结构的选区激光烧结成型工艺研究
6.Study and Realization of Rapid Prototyping Software System Based on Selective Laser Sintering;基于选区激光烧结快速成形技术的软件系统研究与实现
7.Study of Key Technologies of Selective Laser Sintering Processing Based on Temperature Field;基于温度场的选区激光烧结成型工艺关键技术研究
8.Study on Parameters Optimization and Mechanical Properties of Selective Laser Sintering with Nylon6 Mixed Copper Composite Powders尼龙6/铜复合粉末选区激光烧结工艺参数优化及力学性能研究
9.Construction of three dimensional finite element model of skull maxilla and dentitionCT扫描和选区激光烧结技术在颌骨修复中的应用
10.Optimization Design about Process Parameters of Plastic Powder on Selective Laser Sintering of Rapid Prototyping Manufacturing基于树脂基复合材料的选区激光烧结成型参数优化研究
11.Processing Research on Shaping Porous Metal Material Based on SLS Technology基于选区激光烧结(SLS)技术成形多孔金属材料的工艺研究
12.Research on Metal Powder of Rapid Prototyping and Manufacturing Based on Selective Laser Sintering Technology基于选区激光烧结技术的金属粉末成型工艺研究
13.Research Progress in Prototyping Technology of Nylon/Nano-composites Fabricated by Selective Laser Sintering尼龙纳米复合材料的选区激光烧结成型技术研究进展
14.Research on the Process of Selective Laser Sintering Rapid Prototyping;激光选区烧结快速原型技术工艺研究
15.Investigation on Preparation of SiC Particulates Performed by Selective Laser Sintering激光选区烧结碳化硅颗粒预制体成形工艺研究
16.Application of Selective Laser Sintering Rapid Prototyping in Investment Casting激光选区烧结快速成型在熔模铸造中的应用
17.Research Progress on Ceramic Powder Materials by Selective Laser Sintering激光选区烧结陶瓷粉末材料的研究进展
18.Fabricating a Prosthetic Ear by Means of Selective Laser Sintering and Wax Powder选择性激光烧结法烧结复合蜡粉制作耳赝复体
相关短句/例句
selective laser sintering(SLS)选区激光烧结
1.The composite particles were used as fillers to toughen PS based composites prepared by selective laser sintering(SLS).运用TEM,FTIR对乳液聚合方法制备纳米Al2O3/PS复合粒子结构进行了表征,结果表明,制备出的复合粒子具备以纳米氧化铝为核、以聚苯乙烯为壳的核壳式结构;并将核壳式复合粒子用来增韧选区激光烧结聚苯乙烯,结果发现,其缺口冲击强度达到12。
2.In this research,SiCP performed are prepared by selective laser sintering(SLS).应用选区激光烧结技术制备了SiC颗粒预制体,黏结剂是影响SiC颗粒预制体成型性的关键因素之一,在激光烧结成型中对其进行了的选择性试验。
3.An experimental study was carried out for selective laser sintering(SLS) of polystyrene and nano-Al_(2)O_(3) powder mixtures.选区激光烧结法制备聚苯乙烯/A l2O3纳米复合材料的工艺实验表明,在其他激光烧结工艺参数一定,合理匹配激光功率和扫描速度的条件下,直接制备出了无翘曲变形、外形轮廓完好的聚苯乙烯/无机纳米块体复合材料,烧结块体密度最大达到了1。
3)SLS激光选区烧结
1.Investigation on powder paving process ofSLS;激光选区烧结中铺粉过程分析
2.This process includes follow ing steps:firstly, the solid model of the shell mould for investment casting is reversely deduced from the solid model of the casting, and then applyingSLS directly to sinter resin coated sand for forming the shell mould.以轮形铸件为例,研究基于激光选区烧结(Selective Laser Sintering,SLS)技术直接烧结覆膜树脂砂铸造壳型的新工艺。
3.The advantages and disadvantages of simplifying the mould structure, and the molding condition and contraction rate of the successiveSLS three times are discussed.并就简化模具结构设计的优缺点与前后三次激光选区烧结(SLS)的成型工艺条件和收缩率进行了探讨,提出了SLS技术的现状、发展趋势与方向。
4)Selective laser sintering(SLS)激光选区烧结
1.According to the characteristics of selective laser sintering(SLS),a finite element model for analyzing the stress field in SLS process of a multi-component metal powder system was established by using an indirect thermal-mechanical coupling method.根据金属粉末激光选区烧结的特点,采用ANSYS有限元软件中的间接热力耦合方法,建立了多组元金属粉末激光选区烧结应力场分析模型。
5)selective laser sintering激光选区烧结
1.Metal powders ofselective laser sintering;激光选区烧结工艺中的金属粉末材料
2.Study on Some Key Problems Based on Selective Laser Sintering;激光选区烧结快速成型技术中若干关键问题的研究
3.Research Progress on Ceramic Powder Materials by Selective Laser Sintering激光选区烧结陶瓷粉末材料的研究进展
6)selective laser sintering(SLS)激光选区烧结(SLS)
延伸阅读
激光烧结分子式:CAS号:性质:以激光为热源对粉末压坯进行烧结的技术。对常规烧结炉不易完成的烧结材料。此技术有独特的优点。由于激光光束集中和穿透能力小,适于对小面积、薄片制品的烧结。易于将不同于基体成分的粉末或薄片压坯烧结在一起。利用激光可实现高熔点金属和陶瓷的黏结。