固定电荷模型,fixed charge model
1)fixed charge model固定电荷模型
1.Transport phenomena of charged membranes based on the charge models (including the space charge model and thefixed charge model) are cataloged into the three kinds, that is,separation performance,electro-kinetic properties and transport characteristics with respect to the charge effect.根据电荷模型(空间电荷和固定电荷模型),将荷电膜传递现象分为膜的分离性能、电性质及传递参数3类。
2)fixed negative charges固定负电荷
1.To make good use the high energy of solar energy, AlxGa1-xAs was designed to be a added wok layer, andfixed negative charges were introduced on the interface of MIp-AlxGa1-xAs, and the induced potential on interface was established as well, which would result in the formation of MIp+-AlGaAs induced junction and effective diminishment of interface recombination.为充分利用太阳光的短波部分,将AlxGa1-xAs设计为电池的又一个光伏工作层,并引入固定负电荷,建立界面感应势垒,形成MIp+-AlGaAs感应结,有效降低界面对光生电子的复合。
2.By introducingfixed negative charges on the surface of insulation layer of MIp Al x Ga 1 x As which were covered by anti reflection coating, the holes in p Al x Ga 1 x As layer were induced to interface, and the induced potential of electrons on interface was established.在MIp AlxGa1 xAs结构的I层表面上 ,引入固定负电荷 ,并用减反射膜覆盖 ,将p Al1 xGaxAs层中的空穴感应至界面 ,可建立界面电子感应势垒 ,并将其构成MIp AlxGa1 xAs/p n n+ GaAs太阳电池。
3.And it was creative to introducingfixed negative charges to change the shape of the band and to establish an induced potential which would prevent the photo-generated electrons from moving to interface, so as to dropping the interface recombination velocity.7)As为工作层，并作为能带工程的首次成功尝试，创新性引入固定负电荷，改变能带形状，形成阻挡光生电子向界面运动的感应势垒，有效降低复合速度。
3)fixed positive charges固定正电荷
1.In this paper,based on the solar grade silicon MOS,MNS and MNOS systems have been analysed and the interface states,fixed positive charges and leak current have been compared by C-V measurement.对P 硅基体的MOS ,MNS ,MNOS 3种钝化系统通过C V特性测试和电性能分析 ,系统比较了不同结构及在不同的工艺条件下的介面态 ,介面固定正电荷和漏电流等参数。
4)charge models电荷模型
英文短句/例句
1.On Point Charge Model Standard in Electromagnetism;电磁学中点电荷模型标准的教学探讨
2.Modeling and Design of Charge Pump Phase-Locked Loops;电荷泵锁相环的模型研究和电路设计
3.The Calculation of Charge Distributions in Groups Containing Phosphorus Element;MEEM模型下含磷有机基团的电荷分布
4.Study on the Model of Medium-Long Term Load Forecasting for Power System;电力系统中长期负荷预测模型的研究
5.Study on Modeling of Load Forecasting for Distribution Network Planning;配电网规划负荷预测算法及模型研究
6.Research on the Aerodynamic Load of Wind Turbine Blade Model风力发电机组叶片模型气动载荷研究
7.The Research on the Composite Load Model Structure of Traction System牵引供电系统综合负荷模型结构研究
8.Study on Power System Load Forecasting Model Based on Data Mining电力系统负荷预测挖掘模型实证研究
9.Analysis of Voltage Stability based on Dynamic Load Models基于动态负荷模型的电压稳定性研究
10.The Research in Establishing Model of Load which Includes Wind Power Supply含有大型风电厂地区的负荷建模研究
11.Effects of Different Load Models on Anhui Power Grid Stability不同负荷模型对安徽电网稳定的影响
12.Voltage Stability Static Analysis of Power Systems Based on Load Model;基于负荷模型的电力系统电压稳定静态分析
13.Research of Power System Voltage Stability Based on Load Models基于负荷模型分析的电力系统电压稳定性研究
14.Optimal design models of interruptible load price for energy-saving power generation促进发电节能的可中断负荷电价优化设计模型
15.Studies of Load Model and Identification System of Load Characteristics Based on Virtual Instrumentation;电力负荷模型与基于虚拟仪器的负荷特性测辨系统的研究
16.Evaluation Method of Load-following Benefit for Pumped-storage Station Based on the Probability Model of Load-increasing基于概率升荷模型的抽水蓄能电站负荷跟踪效益评估
17.Periodical Adjustable Grey Model for Prediction of Electric Loads电力系统负荷预测的周期性可调灰色模型
18.A New Voltage Model of Load Dynamics and lts Parameters ldentification一种新的负荷动态电压模型及参数辨识
相关短句/例句
fixed negative charges固定负电荷
1.To make good use the high energy of solar energy, AlxGa1-xAs was designed to be a added wok layer, andfixed negative charges were introduced on the interface of MIp-AlxGa1-xAs, and the induced potential on interface was established as well, which would result in the formation of MIp+-AlGaAs induced junction and effective diminishment of interface recombination.为充分利用太阳光的短波部分,将AlxGa1-xAs设计为电池的又一个光伏工作层,并引入固定负电荷,建立界面感应势垒,形成MIp+-AlGaAs感应结,有效降低界面对光生电子的复合。
2.By introducingfixed negative charges on the surface of insulation layer of MIp Al x Ga 1 x As which were covered by anti reflection coating, the holes in p Al x Ga 1 x As layer were induced to interface, and the induced potential of electrons on interface was established.在MIp AlxGa1 xAs结构的I层表面上 ,引入固定负电荷 ,并用减反射膜覆盖 ,将p Al1 xGaxAs层中的空穴感应至界面 ,可建立界面电子感应势垒 ,并将其构成MIp AlxGa1 xAs/p n n+ GaAs太阳电池。
3.And it was creative to introducingfixed negative charges to change the shape of the band and to establish an induced potential which would prevent the photo-generated electrons from moving to interface, so as to dropping the interface recombination velocity.7)As为工作层，并作为能带工程的首次成功尝试，创新性引入固定负电荷，改变能带形状，形成阻挡光生电子向界面运动的感应势垒，有效降低复合速度。
3)fixed positive charges固定正电荷
1.In this paper,based on the solar grade silicon MOS,MNS and MNOS systems have been analysed and the interface states,fixed positive charges and leak current have been compared by C-V measurement.对P 硅基体的MOS ,MNS ,MNOS 3种钝化系统通过C V特性测试和电性能分析 ,系统比较了不同结构及在不同的工艺条件下的介面态 ,介面固定正电荷和漏电流等参数。
4)charge models电荷模型
5)fixed model固定模型
6)fixed charge at interface界面固定电荷
延伸阅读
固定效应模型分子式：CAS号：性质：若被研究的因素是水平可以完全控制的固定因素，对其效应进行检验时，用因素效应方差直接对误差效应方差进行检验，以确定因素效应是否显著。固定效应模型所考察的因素水平，就是该因素的全部水平，所作出统计检验结论只对已试验过的因素水平有效，不能外推到该因素其他未经试验过的水平。
