蠕变性,Creep
1)Creep[英][kri:p][美][krip]蠕变性
1.Formation creep will make the external pressure on the casing get up to the overburden pressure in the process of well production.如果地层不具有蠕变性,地应力不会作用在套管上;如果地层具有蠕变性,且持续时间比较长时,套管所受的外挤载荷为地层的上覆岩层压力。
英文短句/例句
1.Creep Property and Mechanism of AZ31 Magnesium Alloy under High Temperature and Low Stress高温低应力下AZ31镁合金的蠕变性能及蠕变机理
2.A Primary Study of the Creep Properties of Modified Fast-growing Poplars速生杨木改性材蠕变性能的初步研究
3.A Study of the Creep Property of Sn-9Zn Solder and Its Strengthen;Sn-9Zn钎料蠕变性能及其复合增强研究
4.Research on Compressive Creep Bechavior of the Sn-Cu Lead-free Solder;Sn-Cu无铅钎料压蠕变性能的研究
5.The Study on Creep Behavior of FRP Rebar Reinforced Furan Resin Concrete;FRP筋呋喃树脂混凝土蠕变性能研究
6.Tensile Creep Behavior of a 3D-C/SiC Composite at Elevated Temperature;3D-C/SiC的高温拉伸蠕变性能
7.Creep Behavior of Eutectic 63Sn37Pb and Sn0.7Cu Solder Alloys;63Sn37Pb和Sn0.7Cu钎料的蠕变性能研究
8.The Study on High Temperature Low Cycle Fatigue Properties and High Temperature Creep Properties of GH4169 Alloy;GH4169合金高温低周疲劳及蠕变性能研究
9.Study on Indentation Creep Behavior of the Sn-Ag-Bi Lead-free Solder;Sn-Ag-Bi无铅焊料压入蠕变性能的研究
10.Study on Creep Property of Mg_2Si/AM60 CompositesMg_2Si/AM60复合材料蠕变性能的研究
11.Study on Creep Properties of SiC/AZ61 Composites Reinforced with SiC ParticlesSiC/AZ61镁基复合材料蠕变性能的研究
12.A Preliminary Study on the High Temperature Creep Property of Ti-44Al-5Nb-0.85W-0.85B AlloyTi-44Al-5Nb-0.85W-0.85B高温蠕变性能的初步研究
13.Study on Creep and Creep-Fatigue Interaction of P91 Steel;P91钢蠕变特性及蠕变疲劳交互作用研究
14.The Mechanical Modeling of Indentation Creep Test and Creep Characterization;压痕蠕变实验的力学模型与蠕变力学性能表征
15.STUDY OF CREEP-FATIGUE INTERACTION USING A VISCOPLASTIC MODEL COUPLED WITH A CREEP DAMAGE耦合蠕变损伤的粘塑性模型用于疲劳-蠕变交互作用的研究
16.Crystal-plasticity-based creep modelins for Ni-based single crystal superalloy镍基单晶合金蠕变研究:基于晶体塑性的蠕变建模
17.An Investigation of the High Temperature Creep and Superplasticity Deformation of AZ31 Magnesium Alloy;AZ31镁合金高温蠕变及超塑性研究
18.An Experimental Study on Creep Behaviors of 2CrllNiMoVNbNB Steel;2CrllNiMOVNbNB钢的高温蠕变特性实验研究
相关短句/例句
creep property蠕变性
1.Some achievements were introduced,in cluding dilitancy andcreep property of granular material as well as uncertainty of test results.介绍了粗粒土剪胀性、蠕变性、试验成果的不确定性方面的研究成果,并根据球形颗粒三轴试验成果论证了一般粗粒土的变形机理。
3)creep behavior蠕变性能
1.Testing and analysis of thecreep behavior of spandex core-spun yarn;氨纶包芯纱蠕变性能测试与分析
2.Study on thecreep behavior of fabric reinfored PVC calendered flexible composites;织物增强PVC压延类柔性复合材料的蠕变性能研究
3.Creep Behavior of TIC_p,Particulate Reinforced 2024 Aluminum Matrix Composites;TiC_P/2024复合材料的蠕变性能
4)creep properties蠕变性能
1.The comparison of thecreep properties was presented between the duplex and the full lamellar microstructure of high-Nb containing TiAl alloy.将研究结果与高铌TiAl合金全片层组织的蠕变性能进行了对比,发现所研究的双态组织合金具有相对较弱的蠕变抗力,其最小蠕变速率较全片层组织Ti46Al8。
2.Thecreep properties and creep mechanism of Ti-47.5Al-6(Cr,Nb,W,Si,B)%合金在不同试验温度和试验应力下的蠕变性能,并分析了不同试验条件下的蠕变机制。
3.Thecreep properties of the second generation single crystal superalloy DD6 with [001], [011] and [111] orientations have been investigated under different stress levels at 760℃.研究了[001]、[011]和[111]取向760℃不同应力条件下的第二代单晶高温合金DD6的拉伸蠕变性能。
5)Creep property蠕变性能
1.The low creep property of the fairing cabin made of ZM_3 alloy in the turbine engine is a serious problem to be solved.针对某航空发动机ZM3合金制前整流舱生产中长期出现的蠕变性能低的问题,从分析影响ZM3合金蠕变性能的因素入手,提出了解决该问题的技术途径和试验方案。
2.In this paper, creep property of polyamide fibers and polyamide fibers sprayed with metals is studied by Instron Series 5565 Universal Testing Machine, and their creep prosperities with different stress levels and different tensile speeds with same stress levels are also tested.在Instron5565万能强力机下对锦纶基金属镀膜纤维和锦纶基片的蠕变性能进行了研究,测试了其在不同应力水平和同一应力水平不同拉伸速率下的蠕变性能。
3.Their rupture characterization was compared , at the same time, the effect of rare earths on the creep property of Sn - Pb solder alloy was presente05RE两种钎料合金在多轴应力状态下的蠕变断裂规律,初步探讨了主控两种钎料合金蠕变断裂的力学因素,并从金属学角度初步探讨了两种钎料合金的蠕变断裂方式,着重分析了混合稀土对锡铅钎料合金蠕变性能的影响。
6)creep resistance抗蠕变性
1.Thecreep resistance of Y-TZP and ZTA is improved greatly by SiC particulate dispersion because grain boundary sliding during creep is impeded effectively and the growth and coalescence of the creep cavity are constrained by SiC particles.实验结果表明,Y-TZP的蠕变机理为晶界扩散和晶界滑移,SiC颗粒可以有效地抑制晶界滑移过程,大幅度提高Y-TZP的抗蠕变性能;但由于Y-TZP陶瓷的晶界扩散速率大,使Y-TZP/SiC的抗蠕变性能仍较差。
2.The methods of improving thecreep resistance of magnesium alloys and thecreep resistance mechanisms of magnesium alloy at elevated temperature are reviewed.从镁合金高温蠕变机理出发,评述了提高镁合金抗蠕变性能的主要途径和近年来国内外主要抗蠕变镁合金系列(Mg-Al系、Mg-Zn系、Mg-RE系)的研究进展。
延伸阅读
蠕变性分子式：CAS号：性质：橡胶在一定温度和恒定应力（拉伸力、剪切力和压缩力）作用下，橡胶的形变随时间的增加而逐渐增大，最后达到平衡的性能现象为橡胶蠕变性。蠕变包括如下三种形变过程：普弹形变、推迟弹性形变和塑性形变，前两者为可逆形变，后者为不可逆形变。
