低周反复加载,reversed cyclic loading
1)reversed cyclic loading低周反复加载
1.The test of 6 hybrid precast unbonded post-tensioned concrete beams underreversed cyclic loading is carried out.本文采用碳纤维布和外包钢两种加固方法,对6个混合装配无粘结预应力梁进行了低周反复加载试验。
2.In this paper,seismic performances of unbonded post-tensioned precast concrete joints strengthened with CFRP and angle steels underreversed cyclic loading are studied.本文采用碳纤维布和外包钢两种加固方法,对无粘结后张预应力装配梁、柱节点进行了低周反复加载试验研究。
3.This test research 3 hybrid precast unbonded post-tensioned concrete beams underreversed cyclic loading.为了提高预应力装配结构的耗能能力和抗震性能,对3个混合装配无黏结预应力梁进行了低周反复加载试验研究,考虑了初始预应力度、后穿非预应力筋的强度和面积等参数变化。
英文短句/例句
1.Cyclic loading tests of steel beam to concrete wall joints in steel-concrete mixed structures高层建筑混合结构钢梁与混凝土墙节点低周反复加载试验研究
2.Cyclic test of diagonally stiffened steel plate shear wall交叉加劲肋钢板剪力墙低周反复荷载试验研究
3.Study on Sheer Behavior of Concrete Column Strengthened with Carbon Fiber Reinforced Plastic Sheet under Low Cyclic Level Load;碳纤维加固混凝土柱在低周水平反复荷载作用下抗剪性能研究
4.Experimental Research on Concrete-filled Rectangular Tubular Repaired Frame of Low Cyclic Loading损伤方钢管混凝土加固框架低周反复荷载试验研究
5.The Research on the Performance of RC Columns Strengthened with High Performance Composite Cement Mortar Laminates Reinforced by Mesh Reinforcements under Monotonic Loading and Laterally Cyclic Loading;钢筋网高性能水泥复合砂浆加固RC柱在静载与低周反复荷载作用下的性能研究
6.Research on the Test of Slab-Column Structure Subjected to Low Cycle Level Load;低周反复水平荷载作用下板柱结构的试验研究
7.Behaviors Study on Semi-Rigid Composite Joints under Low Cyclic Loading;半刚性组合节点在低周反复荷载作用下的性能
8.T-shape Steel Short Shear Wall Low Week Repeatedly Load Experimental StudyT形型钢短肢剪力墙低周反复荷载试验研究
9.The Ductility Analysis of Circular Steel Tube Compile Column Filled with Steel Reinforced Concrete on Cyclic Loading低周反复荷载下钢骨-钢管混凝土柱的延性分析
10.Experiment on Concrete Columns Reinforced with 500 MPa Fine-Grained Rebar under Low Cycle Reversed Loading配500MPa细晶钢筋混凝土柱低周反复荷载试验
11.Test on thin steel plate shear wall with opening under cyclic loading开洞薄钢板剪力墙低周反复荷载试验研究
12.Experimental study on full scale steel plate shear wall with slits under low-frequency cyclic loads:PartⅠ足尺带缝钢板剪力墙低周往复加载试验研究Ⅰ
13.Experimental study on full scale steel plate shear wall with slits under low-frequency cyclic loads: PartⅡ足尺带缝钢板剪力墙低周往复加载试验研究Ⅱ
14.Study on the Performance of Steel Reinforced High-Strength Concrete Columns under Low Cyclic Reversed Loading;低周反复荷载下型钢高强混凝土柱受力性能研究
15.The Research on Anti-seismic Performance of Beam in Beam-Column Joint of the Composite Frame under Reversed Cyclic Load;低周期反复荷载作用下叠合框架节点梁端抗震性能研究
16.Study on the Anti-Seismic Behavior of Joints between SRC Special-Shaped Columns and Reinforced Beams under Low Cyclic Reversed Loading;低周反复荷载作用下钢骨混凝土T形柱节点抗震性能研究
17.Experiment Research on Joints of Steel Reinforced Concrete Special-shaped Column and Reinforced Concrete Beam under Double-direction Low-cyclic Reversed Loading;钢骨混凝土异形柱钢筋混凝土梁节点低周反复荷载试验研究
18.Study on Performance of New-style Composite Frame under Low-reversed Cyclic Loading;低周反复荷载作用下新型组合框架结构的性能研究
相关短句/例句
low-reversed cyclic loading test低周反复循环加载试验
3)low-cycle reversed loading experiment低周反复加载试验
1.Alow-cycle reversed loading experiment of the steel frame with two stories and two spans has been completed.提出了梁端楔形翼缘连接节点,通过2跨2层梁端楔形翼缘连接钢框架试件的低周反复加载试验,研究了结构在地震作用下的滞回性能、耗能机制、耗能能力、刚度退化和破坏形态。
4)horizontal low cyclic loadings test低周反复水平加载试验
1.Through thehorizontal low cyclic loadings test of different thickness shear wall,the whole destroying process of shear wall is observed,and the properties of strength,deformation and energy are analyzed.对不同厚度的墙体进行了低周反复水平加载试验,观测了墙体的整个破坏过程,分析了墙体的强度、变形和能量特性。
5)low-cycle and reverse horizontal loading test低周反复水平加载试验
6)low cyclic loading低周往复加载
1.OpenSees software is used to carry out static pushover analysis andlow cyclic loading analysis on the CFRP retro-fitted reinforcement concrete short column,and the results are contrasted with the results simulated by ANSYS.采用地震工程开源模拟软件OpenSees对CFRP加固RC短柱进行了静力Pushover分析和低周往复加载分析,并与通用有限元软件ANSYS模拟结果进行对比研究。
延伸阅读
低加浓铀分子式：CAS号：性质：铀中含有0.71％<235U<5％(质量)为低加浓铀。轻水堆中使用的铀燃料含235U的浓缩度约在2％～4％(质量)，属低加浓铀。通过耗费大量电力的同位素分离工艺获得。
