静力学仿真,statics simulation
1)statics simulation静力学仿真
2)mechanical simulation力学仿真
1.Introduces the investigation status about numerical control simulation system and the pivotal technology in geometrical simulation,mechanical simulation and image visual technology.介绍了数控仿真系统的研究现状,仿真系统建立所必须的关键技术,如几何仿真、力学仿真和图像可视化等,并对国内外的研究状况进行了比较,指出国内在数控仿真系统开发方面的成果及存在的不足,最后提出了数控仿真系统的发展趋势。
英文短句/例句
1.Dynamic simulation of submarine Stewart platform潜器Stewart平台动力学仿真
2.Dynamic Simulation Anlysis and Research of Combined Power Plant联合动力装置动力学仿真分析与研究
3.The Kinematics and Dynamics Simulation of the Forestry Special Robot for the Hedge Pruning;林业修剪机器人运动学、动力学仿真
4.Hydrodynamic Simulation and Analysis of Yawing of Bionic Robot Fish仿生机器鱼艏向摆动动力学仿真及分析
5.Simulation of Random Launch and Flight Dynamics of MLRS多管火箭随机发射与飞行动力学仿真
6.Investigation on Dynamics Simulation of Transmission Based on PRO/E and ADAMS;基于PRO/E和ADAMS的变速器动力学仿真
7.Dynamic Analysis on Impact Response of Vehicle-Pedestrian;汽车—行人撞击中的人体动力学仿真
8.The Dynamic Simulation and Analysis for a Parachute-payload System during the Recovery Process;物伞系统回收过程动力学仿真与分析
9.The Dynamics Emulate for the Brake Application Process of the Cable Car for Passenger Transportation;客运缆车断缆锁紧过程的动力学仿真
10.Two Kinds of Independent Suspension s Dynamic Model Based on Lagrange Method;两种独立悬架Lagrange型动力学仿真模型
11.Design of a CAI courseware for dynamic simulating various chemical reactions;化学动力学动态仿真CAI课件的设计
12.Design and Development of Mechanics Experimental Teaching System Based on Simulation Environment仿真力学实验教学软件的设计与开发
13.The Dynamic Analysis and Simulation on a Type of Quadruped Robot;四足仿生机械仿真研究以及动力学分析
14.Dynamics Modelling and Numerical Simulation of One-leg Hopping Kangaroo Robot仿袋鼠单腿跳跃机器人动力学建模与仿真
15.Dynamic Modeling and Simulating Analysis of Lunar Rover月球探测车的动力学建模与仿真分析
16.Simulating Research on Stress Effect in Horizontal Directional Drill Stem;水平定向钻杆力学效应模拟仿真研究
17.Simulation on Dynamic Performance of Wegon and Analysis of Derailment Accident;货车动力学性能仿真及脱轨原因分析
18.Dynamics Modeling and Simulation of Tethered Stratospheric Aircraft;绳索平流层飞行器动力学建模与仿真
相关短句/例句
mechanical simulation力学仿真
1.Introduces the investigation status about numerical control simulation system and the pivotal technology in geometrical simulation,mechanical simulation and image visual technology.介绍了数控仿真系统的研究现状,仿真系统建立所必须的关键技术,如几何仿真、力学仿真和图像可视化等,并对国内外的研究状况进行了比较,指出国内在数控仿真系统开发方面的成果及存在的不足,最后提出了数控仿真系统的发展趋势。
3)Dynamic Simulation动力学仿真
1.Analysis of Contact Model in Multi-body SystemDynamic Simulation;多体系统动力学仿真中的接触碰撞模型分析
2.Parametric modeling and dynamic simulation of three-roll mill transmission;三辊轧机变速器参数化建模及动力学仿真
3.TheDynamic Simulation of the Boom of Crawler Cranes;履带起重机臂架系统动力学仿真
4)dynamics simulation动力学仿真
1.Design anddynamics simulation of MEMS inertia micro-switch based on non-silicon surface micromachining;基于非硅表面微加工的MEMS惯性开关设计与动力学仿真
2.Using pro/e Carries on the three dimensional entity modelling of cylindrical gears and the parametrization design afterdynamics simulation;用Pro/E进行圆柱齿轮三维实体建模及参数化设计后的动力学仿真
3.Dynamics simulation of deployment and locking of spacecraft solar panel using ADAMS;基于ADAMS航天器太阳帆板展开与锁定动力学仿真
5)Dynamical simulation动力学仿真
1.The dynamical simulation model of the vibration absorption system is build up in ADAMS foftware.建立了基于ADAMS的内置式动力减振镗杆动力学仿真模型,以减小刀刃径向跳动在整个频域内响应的最大值为目标对样机模型进行了优化分析,得出了减振系统的最优参数。
2.The dynamical simulations in field cases were used to adjust the distribution of the support rollers according to the optimization criterion.基于ADAMS软件中的ATV模块对某型履带装甲车辆建立了动力学模型,针对各托带轮所受履带的垂向冲击力大小不均匀的问题,综合动力学仿真分析,优选托带轮的分布方式,改善其动力学性能。
3.And taking a example of double-frequency composed vibration compaction, the theoretical analysis, experiment and dynamical simulation were carried on in the paper.为了强化压实过程,本文提出多频合成振动压实方法,即任一时刻有多个激振频率及其对应的振幅同时作用于被压实材料上,使被压实材料大小不同的颗粒同时处于共振状态的压实方法,并以双频合成振动压实为例进行了理论分析、试验和动力学仿真研究。
6)simulation of dynamics动力学仿真
1.This paper proposes a method ofsimulation of dynamics for propulsive shafting of ship by ANSYS.本文基于ANSYS环境提出一种船舶推进轴系动力学仿真方法,并首次探讨了主机在轴系动力学仿真中的影响。
延伸阅读
国际仿真数学与仿真计算机学会各国仿真数学和仿真计算机方面的学者和团体联合组成的国际性学术组织,缩写IAMCS。1955年成立。原名国际模拟计算机学会(IAAC),1976年改用现名。中国自动化学会系统仿真专业委员会代表中国参加这个学会。学会总部设在比利时的布鲁塞尔。学会的宗旨是促进计算机仿真方面的专家、制造厂和用户之间交流科学信息。该会接受个人会员和团体会员(包括有关的工厂、机关和研究所),并设有荣誉会员。每三年举行一次国际性大会。它是5个国际学会协调委员会(FIACC)成员之一。其他 4个是国际自动控制联合会(IFAC)、国际信息处理联合会(IFIP)、国际运筹学会联合会(IFORS)和国际测量联合会(IMEKO)。学会出版物有:《IAMCS会议录》,《IAMCS会刊(仿真数学与仿真计算机)》和《IAMCS会刊(应用数值数学)》。