粘结抗剪强度,adhesive shearing strength
1)adhesive shearing strength粘结抗剪强度
1.This paper studied the interfacialadhesive shearing strength between the cement-based mortar and the concrete substrate,and investigated the microstructures of the interfacial zones between the new mortars and the old concretes.研究了在采用不同的界面剂处理下,水泥基砂浆加固混凝土构件的界面粘结抗剪强度,并进行了加固砂浆和基层混凝土的界面处的微观结构观测分析。
2)Shear bond strength抗剪粘结强度
英文短句/例句
1.Experimental study on shear bonding strength of textile reinforced concrete (TRC) for strengtheningTRC加固构件抗剪粘结强度试验研究
2.Effects of Er,Cr:YSGG Laser Irradiation on Shear Bond Strength between Dentin and GICsEr,Cr:YSGG激光照射对牙本质和玻璃离子水门汀抗剪粘结强度的影响
3.The investigation of shear strength of partly consolidated clay未完全固结软粘土抗剪强度试验研究
4.Effect of sandblasting on shear bond strength between rebonded metal brackets and enamel喷砂处理对脱落托槽与牙面粘结的抗剪切强度
5.Shear Bond Strength of Orthodontic Brackets Bonded with a Self-etching Adhesive;自酸蚀粘接剂粘接抗剪切强度的实验研究
6.The Effect of Treating Time on the Shear Bond Strength of the Seventh Generation of Adhesive粘结处理时间对第七代粘结剂剪切强度的影响
7.Study on application of earthquake-resistant and shear-resistant strength theory of stone structure石砌体结构抗震抗剪强度理论的应用
8.Study on Shear Strength Test of Muddy Soil & Silty Interbeded Soil淤泥质粘土与粉砂互层土抗剪强度试验研究
9.Effects of Salinization on Shearing Strength of Cohesive Soil盐化作用对粘性土抗剪强度的影响规律研究
10.Effect of Chlorhexidine Application on Shear Bond Strength of Brackets Bonded with Fuji Ortho LC氯己定对FujiOrtho LC粘接托槽抗剪切强度的影响初探
11.THE INFLUENCE OF THE WATER RATIO ON THE SHEARING STRENGTH OF SILTY CLAY含水率对粉质粘土抗剪强度的影响研究
12.Shear Strength Behavior of Over-consolidation Clay in Ring Shear Tests;利用环剪仪对超固结黏土抗剪强度特性的研究
13.Shear strength behavior of overconsolidated clay in ring shear tests采用环剪仪对超固结黏土抗剪强度特性的研究
parison on Shear Bond Strength of Edgewise Brackets Bonding with Three Orthodontic Adhensives under Different Adhensive Conditions;三种正畸秞质粘接剂在不同粘接条件下的抗剪切强度比较
15.Effect of Self-etching Primer on Shear Bond Strength of Orthodontic Brackets within 1 Hour in Vitro自酸蚀粘接系统粘接托槽1小时内抗剪切强度的实验研究
16.Shear bond strength of three different orthodontic adhesives used in Fx glass ionomer cement filling materials三种正畸粘接剂粘接玻璃离子充填体的抗剪切强度
17.The Influence of Different Silane Coupling Agents and Adhesive Materials on Shear Bond Strength of Metal Brackets to Porcelain Surface-An in Vitro Experiment;不同偶联剂和粘结剂对烤瓷瓷面与金属托槽抗剪切强度影响的体外研究
parative study of shear bonding strength on different bonding treatments of different fiber posts in root canal不同纤维桩与根管不同粘结处理修复后剪切粘结强度对比研究
相关短句/例句
Shear bond strength抗剪粘结强度
3)Shear bond strength抗剪切粘结强度
4)bonding shear strength抗剪粘接强度
1.By adopting a new anchoring method, interfacial failure happened between CFRP sheets and concrete, the effective jointing length between Sika~ CarboDur~ CFRP sheets and concrete is about 200 mm, and the interfacialbonding shear strength reached 20~30 MPa.试验结果表明,复合材料碳纤维板与混凝土的有效粘接长度约为200mm左右,碳纤维板与混凝土的界面抗剪粘接强度在20~30MPa之间。
5)shear strength of clay粘土抗剪强度
6)shear bond strength粘接抗剪切强度
1.In this study , we bonded resin orthodontic brackets to two kind of commonly - used prosthodontic materials: porcelain and light - cured composite resin with domestic adhesive, ordinary light - cured composite resin and BISCO ORTHO - ONE~? orthodontic Direct Bonding System respectively and then theshear bond strength of the re.本实验通过使用不同的粘接剂粘接树脂托槽与经过不同方式表面处理的瓷和光固化复合树脂修复材料,对其粘接抗剪切强度,影响树脂托槽与修复材料直接粘接的因素以及去粘接后原修复面的完整性进行实验研究。
2.In this study, we bonded metal orthodontic brackets to two kinds of commonly-used prosthodontic materials: porcelain and light-cured composite resin with domestic adhesive and ordinary light-cured composite resin respectively and then theshear bond strength of the metal brackets, the integrity of the prosthodontic surface after debonding and the microsco.本研究使用国产的粘合剂和普通光固化复合树脂粘接金属托槽与瓷、光固化复合树脂两种常用的修复材料,并对其粘接抗剪切强度,去粘接后原修复面的完整性,表面处理后修复面的显微形态结构进行了实验研究。
延伸阅读
粘结1.谓黏合连结的作用。