加热喷雾法,heated- spray method
1)heated- spray method加热喷雾法
1.In this paper, the membrane electrode assembly was prepared byheated- spray method and a single direct methanol fuel cell system was assembled and tested.结果表明:加热喷雾法制备膜电极具有良好扩散层结构,获得了优良的电池性能;在电池温度为55℃、输出电压为0。
英文短句/例句
1.Study on performance of MEA prepared by heated-spray method for direct methanol fuel cell加热喷雾法制备DMFC扩散层的性能研究
2.Investigation on Preparation of Barium Titanate Particle by Spray Pyrolysis喷雾热分解法制备钛酸钡粉体的研究
3.Research of Flow and Combustion in the Burner of a Spray-type Vehicle Heater;喷雾式汽车加热器燃烧器的流动和燃烧研究
4.Research on Rare Earth Dopted Yttrium Aluminum Garnet Phosphor Synthesized by Spray Pyrolysis;喷雾热解法制备稀土钇铝石榴石荧光粉
5.Study on the Determination of Lead by Thermospray Flame-heated Quartz Furnace Atomic Absorption Spectrometry;热喷雾进样火焰原子吸收光谱法测定铅的研究
6.Characteristics of ZnO Films Prepared by Ultrasonic Spray Pyrolysis Method;超声喷雾热解法ZnO薄膜的制备与性能研究
7.Preparation of Doped Tin Oxide Thin Films by Spray Pyrolysis Process;喷雾热解法制备掺杂二氧化锡导电薄膜
8.Preparation of SnO_2:Sb Film by Spray Pyrolysis Deposition and Its Performance Study;喷雾热分解法制备SnO_2:Sb薄膜及其性能研究
9.Preparation of P-type Transparent Conducting SnO_2 Thin Films by Spray-pyrolysis;喷雾热解法制备P型透明导电的二氧化锡薄膜
10.Preparation and Properties of Tin Oxide Thin Films by Spray Pyrolysis Pyrolysis;喷雾热解法制备氧化锡薄膜工艺及性能研究
11.Research progress of preparing CeO_2 nanoparticles by spray pyrolysis technique喷雾热分解法制备纳米CeO_2粉末的研究进展
12.Preparation of SnO_2 Ultrafine Particles by Spray Pyrolysis Method and Optimization of Technological Parameters喷雾热分解法制备超细SnO_2粉体及工艺参数优化
13.Fabrication of P type Zn_(1-x)Mg_xO thin film by ultrasonic spray pyrolysis用超声喷雾热分解法制备p型Zn_(1-x)Mg_xO薄膜
14.Test methods for manual sprayerGB/T15404-1994喷雾器试验方法
15.The Synthesis and Characterization of the Nano-Spinel Powders by Spray-Pyrolysis;喷雾热解法合成镁铝尖晶石纳米粉末的制备与表征
16.Spray Pyrolysis Preparation and Hydrophylicity of Titanium Dioxide Film;喷雾热解法制备二氧化钛薄膜及其亲水性能的研究
17.The preparation and photocatalytic activity of N-doped nano-TiO_2 thin film prepared by ultrasonic spray pyrolysis超声喷雾热解法制备的氮掺杂纳米TiO_2薄膜及其光催化特性研究
18.Preparation of Ni-doped TiO_2 Film with Spin-coating Spray Pyrolysis Method and Research on its Self-cleaning ActivityNi掺杂TiO_2薄膜的甩胶喷雾热分解法制备和自清洁性能的研究
相关短句/例句
spray processing喷雾加工法
3)Spray pyrolysis喷雾热解法
1.Preparation and characterization of SnO_2∶Sb thin films by spray pyrolysis process;喷雾热解法制备掺锑二氧化锡薄膜及其性能表征
2.Transparent TiO_2 thin films were prepared by spray pyrolysis deposition and the crystalline structure and surface morphology of the TiO_2 films obtained were characterized by X-ray diffraction and scanning electron microscope.用喷雾热解法制备TiO2超亲水薄膜。
3.Spherical YAG∶Ce~(3+) phosphor particles with narrow size distribution were synthesized by spray pyrolysis.采用喷雾热解法制备了无团聚的球形YAG∶Ce3+荧光粉。
4)spray bottle heater喷雾瓶加热器
5)exhaust-heated atomizer排气加热喷雾器
6)spray pyrolysis method喷雾热分解法
1.SnCl4·5H2O as raw material,SnO2 ultrafine particles were prepared byspray pyrolysis method.5H2O为原料,采用喷雾热分解法制备超细SnO2粉体,结果表明,通过控制反应炉温、前驱体溶液浓度、载气流量,选择合适的添加剂可以有效调控粉体的粒度与形貌。
2.With SnCl4·5H2O as precusor,SnO2 ultrafine particles were prepared byspray pyrolysis method.5H2O为前驱体,采用喷雾热分解法制备了超细SnO2粉体,研究了反应温度、前驱体溶液浓度和载气流量等工艺参数对粉体粒径和形貌的影响,并对工艺参数进行了优化。
延伸阅读
加热分子式：分子量：CAS号：性质：热源将热能传给较冷物体而使其变热的过程。根据热能的获得，可分为直接的和间接的两类。直接热源加热是将热能直接加于物料，如烟道气加热、电流加热和太阳辐射能加热等。间接热源加热是将上述直接热源的热能加热能加于一中间载热体，然后由中间载热体将热能再传给物料，如蒸汽加热、热水加热、矿物油加热等。
