H3C交换机创建ssh用户登录和设置aux密码
一、ssh登录设置
1、配置ssh密码登录,登录级别为1 (交换机型号：H3C s3100)
public-key local create rsa #以前配过ssh此步骤可以省略
user-interface vty 0 4
authentication-mode scheme
protocol inbound ssh
local-user hualu#增加用户为hualu
password cipher 123456
service-type ssh level 1#ssh登录级别为1
ssh user hualu authentication-type password
如果是5500：执行如下命令：
service-type ssh
authorization-attribute level 1
ssh user hualu service-type all authentication-type password
2、设置acl访问规则
acl number 2000
rule 1 permit source 10.2.33.241 0 #绑定acl 2000到vty接口
user-interfac vty 0 4
acl 2000 inbound
3、修改超级权限密码：
super password cipher 123456
ssh server enable
4、保存配置输入save命令
[dmz_7503-2]save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg](To leave the existing filename unchanged, press the enter key):flash:/startup.cfg exists, overwrite? [Y/N]:y
Validating file. Please wait...Now saving current configuration to the device.Saving configuration flash:/startup.cfg. Please wait...................... Saved the current configuration to mainboard device successfully.. Saved the current configuration to slaveboard device successfully.Configuration is saved to device successfully.
二、设置AUX登录密码：
[H3C]user-interface aux 0
[H3C-ui-aux0]authentication-mode password
[H3C-ui-aux0]set authentication password cipher 123456#123456是密码
[H3C-ui-aux0]history-command max-size 20
[H3C-ui-aux0]idle-timeout 6 0
[H3C-ui-aux0]screen-length 30
[H3C-ui-aux0]quit
[H3C]save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
flash:/startup.cfg exists, overwrite? [Y/N]:y
Validating file. Please wait....
Configuration is saved to device successfully.
