环境介绍：
Master: 192.168.0.1
Slave: 192.168.0.2
Virtural IP Address (VIP): 192.168.0.253
设计思路：
当 Master 与 Slave 均运作正常时, Master负责服务，Slave负责Standby；
当 Master 挂掉，Slave 正时, Slave接管服务，同时关闭主从复制功能；
当 Master 恢复正常，则从Slave同步数据，同步数据之后关闭主从复制功能，恢复Master身份，于此同时Slave等待Master同步数据完成之后，恢复Slave身份。
然后依次循环。
需要注意的是，这样做需要在Master与Slave上都开启本地化策略，否则在互相自动切换的过程中，未开启本地化的一方会将另一方的数据清空，造成数据完全丢失。
下面，是具体的实施步骤：
在Master和Slave上安装Keepalived
$ yum install keepalived
修改Master和Slave的/etc/hosts文件
$ vim /etc/hosts
127.0.0.1 localhost
192.168.0.1 redis
192.168.0.2 redis-slave
默认安装完成keepalived之后是没有配置文件的，因此我们需要手动创建：
首先，在Master上创建如下配置文件：
$ vim /etc/keepalived/keepalived.conf
vrrp_script chk_redis {
script "/etc/keepalived/scripts/redis_check.sh" ###监控脚本
interval 2###监控时间
}
vrrp_instance VI_1 {
state MASTER ###设置为MASTER
interface eth0 ###监控网卡
virtual_router_id 51
priority 101 ###权重值
authentication {
auth_type PASS ###加密
auth_pass redis###密码
}
track_script {
chk_redis ###执行上面定义的chk_redis
}
virtual_ipaddress {
192.168.0.253 ###VIP
}
notify_master /etc/keepalived/scripts/redis_master.sh
notify_backup /etc/keepalived/scripts/redis_backup.sh
notify_fault /etc/keepalived/scripts/redis_fault.sh
notify_stop /etc/keepalived/scripts/redis_stop.sh
}
然后，在Slave上创建如下配置文件：
$ vim /etc/keepalived/keepalived.conf
vrrp_script chk_redis {
script "/etc/keepalived/scripts/redis_check.sh" ###监控脚本
interval 2###监控时间
}
vrrp_instance VI_1 {
state BACKUP###设置为BACKUP
interface eth0###监控网卡
virtual_router_id 51
priority 100###比MASTRE权重值低
authentication {
auth_type PASS
auth_pass redis ###密码与MASTRE相同
}
track_script {
chk_redis ###执行上面定义的chk_redis
}
virtual_ipaddress {
192.168.0.253 ###VIP
}
notify_master /etc/keepalived/scripts/redis_master.sh
notify_backup /etc/keepalived/scripts/redis_backup.sh
notify_fault /etc/keepalived/scripts/redis_fault.sh
notify_stop /etc/keepalived/scripts/redis_stop.sh
}
在Master和Slave上创建监控Redis的脚本
$ mkdir /etc/keepalived/scripts
$ vim /etc/keepalived/scripts/redis_check.sh
#!/bin/bash
0ALIVE=`/opt/redis/bin/redis-cli PING`
if [ "$ALIVE" == "PONG" ]; then
echo $ALIVE
exit 0
else
echo $ALIVE
exit 1
fi
编写以下负责运作的关键脚本：
notify_master /etc/keepalived/scripts/redis_master.sh
notify_backup /etc/keepalived/scripts/redis_backup.sh
notify_fault /etc/keepalived/scripts/redis_fault.sh
notify_stop /etc/keepalived/scripts/redis_stop.sh
因为Keepalived在转换状态时会依照状态来呼叫：
当进入Master状态时会呼叫notify_master
当进入Backup状态时会呼叫notify_backup
当发现异常情况时进入Fault状态呼叫notify_fault
当Keepalived程序终止时则呼叫notify_stop
首先，在Redis Master上创建notity_master与notify_backup脚本：
$ vim /etc/keepalived/scripts/redis_master.sh
#!/bin/bash
REDISCLI="/opt/redis/bin/redis-cli"
LOGFILE="/var/log/keepalived-redis-state.log"
echo "[master]" >> $LOGFILE
date >> $LOGFILE
echo "Being master...." >> $LOGFILE 2>&1
echo "Run SLAVEOF cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF 192.168.0.2 6379 >> $LOGFILE 2>&1
sleep 10 #延迟10秒以后待数据同步完成后再取消同步状态
echo "Run SLAVEOF NO ONE cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF NO ONE >> $LOGFILE 2>&1
$ vim /etc/keepalived/scripts/redis_backup.sh
#!/bin/bash
REDISCLI="/opt/redis/bin/redis-cli"
LOGFILE="/var/log/keepalived-redis-state.log"
echo "[backup]" >> $LOGFILE
date >> $LOGFILE
echo "Being slave...." >> $LOGFILE 2>&1
sleep 15 #延迟15秒待数据被对方同步完成之后再切换主从角色
echo "Run SLAVEOF cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF 192.168.0.2 6379 >> $LOGFILE 2>&1
接着，在Redis Slave上创建notity_master与notify_backup脚本：
$ vim /etc/keepalived/scripts/redis_master.sh
#!/bin/bash
REDISCLI="/opt/redis/bin/redis-cli"
LOGFILE="/var/log/keepalived-redis-state.log"
echo "[master]" >> $LOGFILE
date >> $LOGFILE
echo "Being master...." >> $LOGFILE 2>&1
echo "Run SLAVEOF cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF 192.168.0.1 6379 >> $LOGFILE 2>&1
sleep 10 #延迟10秒以后待数据同步完成后再取消同步状态
echo "Run SLAVEOF NO ONE cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF NO ONE >> $LOGFILE 2>&1
$ vim /etc/keepalived/scripts/redis_backup.sh
#!/bin/bash
REDISCLI="/opt/redis/bin/redis-cli"
LOGFILE="/var/log/keepalived-redis-state.log"
echo "[backup]" >> $LOGFILE
date >> $LOGFILE
echo "Being slave...." >> $LOGFILE 2>&1
sleep 15 #延迟15秒待数据被对方同步完成之后再切换主从角色
echo "Run SLAVEOF cmd ..." >> $LOGFILE
$REDISCLI SLAVEOF 192.168.0.1 6379 >> $LOGFILE 2>&1
然后在Master与Slave创建如下相同的脚本：
$ vim /etc/keepalived/scripts/redis_fault.sh
#!/bin/bash
LOGFILE=/var/log/keepalived-redis-state.log
echo "[fault]" >> $LOGFILE
date >> $LOGFILE
$ vim /etc/keepalived/scripts/redis_stop.sh
#!/bin/bash
LOGFILE=/var/log/keepalived-redis-state.log
echo "[stop]" >> $LOGFILE
date >> $LOGFILE
给脚本都加上可执行权限：
$ chmod +x /etc/keepalived/scripts/*.sh
脚本创建完成以后，我们开始按照如下流程进行测试：
1.启动Master上的Redis
$ /etc/init.d/redis start
2.启动Slave上的Redis
$ /etc/init.d/redis start
3.启动Master上的Keepalived
$ /etc/init.d/keepalived start
4.启动Slave上的Keepalived
$ /etc/init.d/keepalived start
5.尝试通过VIP连接Redis:
$ redis-cli -h 192.168.0.253 INFO
连接成功，Slave也连接上来了。
role:master
slave0:192.168.0.2,6379,online
6.尝试插入一些数据：
$ redis-cli -h 192.168.0.253 SET Hello Redis
OK
从VIP读取数据
$ redis-cli -h 192.168.0.253 GET Hello
"Redis"
从Master读取数据
$ redis-cli -h 192.168.0.1 GET Hello
"Redis"
从Slave读取数据
$ redis-cli -h 192.168.0.2 GET Hello
"Redis"
下面，模拟故障产生：
将Master上的Redis进程杀死：
$ killall -9 redis-server
查看Master上的Keepalived日志
$ tail -f /var/log/keepalived-redis-state.log
[fault]
Thu Sep 27 08:29:01 CST
同时Slave上的日志显示：
$ tail -f /var/log/keepalived-redis-state.log
[master]
Fri Sep 28 14:14:09 CST
Being master....
Run SLAVEOF cmd ...
OK
Run SLAVEOF NO ONE cmd ...
OK
然后我们可以发现，Slave已经接管服务，并且担任Master的角色了。
$ redis-cli -h 192.168.0.253 INFO
$ redis-cli -h 192.168.0.2 INFO
role:master
然后我们恢复Master的Redis进程
$ /etc/init.d/redis start
查看Master上的Keepalived日志
$ tail -f /var/log/keepalived-redis-state.log
[master]
Thu Sep 27 08:31:33 CST
Being master....
Run SLAVEOF cmd ...
OK
Run SLAVEOF NO ONE cmd ...
OK
同时Slave上的日志显示：
$ tail -f /var/log/keepalived-redis-state.log
[backup]
Fri Sep 28 14:16:37 CST
Being slave....
Run SLAVEOF cmd ...
OK
可以发现目前的Master已经再次恢复了Master的角色，故障切换以及自动恢复都成功了。
